master cylinder?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 25, 2005
Threads
196
Messages
2,277
Location
Central valley (Cali)
ok ive read and read but cant find my answer? i have a 66 fj40 with drums all the way around, i replaced the master about 9 mo.ago and its leaking,tore it down once already and it stopped,but doing it again.... does anyone have a after market master cylinder there running,or could i start planning my disc conversion now by getting started on upgrading my m.c. ( mini or chevy?)


thanks in advance


James
 
hudyhue said:
...or could i start planning my disc conversion now by getting started on upgrading my m.c. ( mini or chevy?)


thanks in advance


James




Upgrading your brakes to dual-circut disc and drum, or four wheel disc would be the direction I choose....

Spent the money on a new master, lines, hoses, wheel cylinders, shoes and drums for the Red truck back in 1989...all toyota goodies....would not even think of messing around with that again. Not worth the time or money...


Good luck!


-Steve
 
Remember you have the support on the fire wall to deal with. I would rather use the adaptor/spacer then to cut the support. If you run the stock 6, I hear this will cause the master to come real close to and somethimes not fit because of the carb.

Ditch the drums... You'll be happy you did in the long run...
 
right on thanks guys!
 
Back
Top Bottom