MAF drop bracket measurement

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Pitch

Driving from the 2nd row
SILVER Star
Joined
Jul 14, 2013
Threads
63
Messages
1,103
Location
Flagstaff, AZ
Can anyone with MAF/4Plus drop brackets tell me the measurements that they have from center to center on the control arm mounting bolts. And, then post up what size brackets these are. I have brackets that measure 3 1/8" from the stock mount to the lowered mount. I assume this is a 3" drop bracket, but not sure, as I am not the original purchaser. Just looking for confirmation on sizing before ordering a different pair.

Thanks in advance.
 
The MAF brackets are essentially for caster correction. So, if the bracket you have moves the rear of the control arm down 3" then that would compensate for 3" of suspension lift (since that would have moved the axle end of the control arm down 3" as well).

Many don't like the brackets since they hang low and are easy to catch on when in the rocks etc...

cheers,
george.
 
Back
Top Bottom