Lug nuts.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 9, 2016
Threads
5
Messages
37
Location
Nebraska
Hey, quick question. I put taco rims on my 80 series. In doing so I need to switch to shouldered lug nuts with washers for the new wheels. Will factory taco lug nuts fit the 80 series studs? I don't have any taco lug nuts to try and I don't want to buy the wrong thing. 1991 semi float axle if that makes a difference. Thanks in advance!
 
IIRC You Will need the factory taco nuts because they are the acorn style instead of the washer type we have on the factory wheels. I believe they are the same size and thread pitch too
 
Cool, it was the thread pitch and size that I was worried about screwing up on. Thanks!
 
Are the wheels steel or aluminum? acorns for steel, barrel w/washer for aluminum.
all toyota studs are same thread except The 5-bolt trucks(Tundra, Land Cruiser). those are 14mm studs
 
Are the wheels steel or aluminum? acorns for steel, barrel w/washer for aluminum.
all toyota studs are same thread except The 5-bolt trucks(Tundra, Land Cruiser). those are 14mm studs
The 80 Series aluminum rims, while looking identical through the years, came in two flavors: early (93-94 I think) is acorn (aka lug-centric) and later aluminums were flat (hub-centric). Important to keep in mind if buying used aluminum rims. They are interchangeable of course, but will require different lug nuts.
 
Oh, for the love of God.
Do you know how many threads reference lug nuts and types of wheels? more than 2 is too many.

Yes, you are right there were a couple years with conical nuts. in reality, the shouldered nuts double as conical nuts since the bottom is tapered and meant for use with the spare.
This guy asked about the threads. i wanted to note the threads are the same on damn near everything and made a generalization because it would help in this situation.
 
Back
Top Bottom