Low speed Clunky Trans/diff or tranfer case

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 19, 2008
Threads
1
Messages
2
Looking for some help on a 1994 80 series. It has been experiencing some clunking on acceleration and deceleration at low speeds. Took it to a good mechanic and we have gone through everything and can not seem to find the problem. Just checking to see if anyone else has experienced this problem and what they did to solve it.

Also I am looking for a good lift kit for it but it appears no one makes anything great. Any comments are greatly appreciated

Todd
 
Todd,

I beg to differ on the lift kits. There are some awesome kits out there.
What are you looking for in particular?

Regarding the noise. Have your check your driveshaft CV joints? When was the last time you greased them?

Regards

Alvaro
 
Mine was clunking BAD when I got it. Pulled the drive shafts out, replaced the U-joints, and put them back together 90 degrees out of phase... still clunks some, but not nearly as bad as it was, and almost unnoticeable when I keep everything greased.

From what I've seen posted at mud, drive shaft clunking to some degree is just a fact of life with these trucks.
 
Todd,

Take the driveshafts off your truck. Have a drive line shop check the joints.
If they need to be replaced, replace them only with Toyota parts. Don't let them talk you into doing something else.
CDAN here in the forum is a great resource for parts.

As far as lift kits goes, I'd suggest the OME 2.5 Heavy lift kit, including the caster correction bushings. You can find more info at Sleeoffroad.com - Toyota SUV Off-Road Outfitters

BTW, I have no affiliation with Slee or CDAN. Just a satisfied customer.

Regards

Alvaro
 
Back
Top Bottom