For Sale low mile 93 FZJ80 drivetrain - Drive before you buy!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 1, 2007
Threads
37
Messages
452
Location
Southwest Virginia
Location
United States
SOLD


Time to start my project. I will be selling a 1FZE motor, A442F transmission and H2FAV transfer case to fund a diesel project.
The engine and transmission are original to my truck, a 1993 FZJ 80 with (approx) 125,000 miles, the transfer case is my spare unit.
The engine has new plugs, wires, cap, and rotor. I have also replaced most of the coolant hoses (most will be included), there is a new Toyota water pump, fan clutch, and thermostat installed.
I am also including all accessories (a/c compressor [new] P/S pump, alt).

I am even including my York compressor and mount, which is currently installed and working great!
Hell, I will even include the exhaust (which is new from the converter back!) with new Toyota 02 sensors. Of course, it will be a little cut up...

This engine runs great, the transmission shifts well and I am very happy with the performance, but its time for a project!

I plan on pulling the drivetrain in March, which will give anyone who is interested time to actually drive the truck.

The truck is located in southwest Va. I will be happy to send pictures / video to anyone who is interested.

I am asking $2000 OBO for everything! Shipping will be on your dime.
 
Last edited:
Adding a couple of pictures.
P1020140 [800x600].webp
P1020139 [800x600].webp
P1020141 [800x600].webp
 
Damn, if you were only closer I'd come grab this ...

Good luck and here's a free bump for ya.

Cheers
P.S. If you ever part it , let me know on the EGR valve =)
 
Where's the build link? New power and drive train, sounds interesting. Post your plans!
 
Damn, if you were only closer I'd come grab this ...

Good luck and here's a free bump for ya.

Cheers
P.S. If you ever part it , let me know on the EGR valve =)

I would be happy to put it on a pallet:D

Where's the build link? New power and drive train, sounds interesting. Post your plans!

No build thread, yet.
I picked up a Chevy pickup with a 6.5 turbo diesel with only 115,000 miles for $900!! It is just WAY too tempting!

BTW, the mileage is closer to 130,000 on my cruiser:whoops:
P1020143 [800x600].webp
 
Last edited:
I'm sure there is someone with a nice 80 that needs this drivetrain. Complete and perfect, and half the price of a motor rebuild OR a tranny rebuild!
 
I know!
I tell you what, for this price ($2000), I will even cover the cost of shipping!! ( shipping dock to dock, lower 48 states only!!!)
 
Any interesting in parting the compressor & brackets?
 
OK, what if I take away the "Free Shipping" and lower the price to $1600!!

Not bad especially considering that it includes the on board air set-up!!
 
If u decide to part out the York and bracket, or just the bracket please pm, I can get a used York locally for around $20, but can't find those brackets anywhere and I'm needing one bad, that's something I have wanted for a while no one makes or gas them anymore
 
I plan on keeping the OBA with the engine for now. I have the Engine advertised on Craigslist for $900 - If you know of anyone in Ala. that needs an engine...:hhmm:
 
Is that $900 just motor or full motor tranny and transfer? Bc if that's the case I could def be interested in buying it to build it so that when my stock stuff craps out I'll have a direct bolt in replacement already built! But I'll have to wait till at least the 21st of march when I get back in town
 
Back
Top Bottom