low compression ?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 12, 2002
Threads
51
Messages
247
my buddy just picked up a 92- 80 and it doesnt run he did a compression test and he says all cyl are @70 psi no major dofferences between .I am going over to give him a hand but would like to know where to start. thanks it has 130K on it
 
I would start by pouring a tea spoon of oil in each spark plug hole and then check the compression again. If it goes up, the rings are worn out. If it stays low, you more than likely have some bad valves. I would also check the timing. It would be rare for all of the valves to have the exact same problem to cause even compression without the timing being an issue. What should the compression be on those?
 
thats what we were thinking he has started to pull the front of the motor apart to get to the timing gears we thought the keyway may be worn .
 
any other things to check?going over on thursday but I have been telling him stuff over the phone
 
Back
Top Bottom