Looking for opinions

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 15, 2019
Threads
2
Messages
3
Location
Japan
On my new rig after giving it a decent wash and wax I have to say I am rather impressed with its condition. The only real wear is the roof with some oxidization and some very minor rust. Because it's the roof, I am debating just Herculining the top to pretty much cover it. I am curious if others have done this or get an opinion of better options.

50282488_2036986009723637_8247050971755053056_n.webp


50333797_2036986029723635_5253938381146030080_n.webp


50708420_2036986023056969_2105024821082456064_n.webp
 
Its been done before. Often leading to schmearing liner over the whole rig. herculiner to me has the least desirable look and texture of all the liners. U-pol raptor liner or monstaliner would get my vote if using a liner.

The truck looks good though. To me it deserves a shot of paint first

Covering it up without cleanup and prep on rust areas will prove a mistake over time.
 
Many have done a white monstaliner on the top only. Keeps it cooler.
 
Many have done a white monstaliner on the top only. Keeps it cooler.

THIS is what I’ve been thinking about! I believe this spring I’ll literally “pull the trigger”, and spray the top white!
 
THIS is what I’ve been thinking about! I believe this spring I’ll literally “pull the trigger”, and spray the top white!

White roofs help bring the 80 series back to its roots!
 
Clean and wax to best possible condition and then put money towards roof rack. My choice is Bowfin cruisers rack. @dogfishlake will hook you up. You won't notice roof once you put on rack
 
Nobody sees the roof but you, great place to practice your body and painting skills. Don’t mess around with the rust do it right- remove, treat, seal.

There are no hard lines or brake points (like between body panels) to blend the white roof with the stock paint so keep that in mind. You will have to get creative with taping and know that there will be a raised edge.

Unless you are prepared to spray(HVLP or LVLP) then rolling on a “liner” may be your best bet. Like the idea of white
 
I’m for just dabbing rust converter paint over whatever isn’t loose scale.

Do that, then really think what you want to do.

POR-15 even comes in a couple colors besides black now, FWIW. :meh:
 
Back
Top Bottom