Locknut Socket Size?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

What size socket for the lock nuts for the front wheel bearings on an 91 FJ80? 54mm? What is the inch equivalent?

Thanks, Dennis

It should be a 54mm, that is what is used on the 93-97's.

A 2 1/8 standard socket might be close enough to 54mm.
 
X2 on nicholas suggestion
For the axel nut I used a 2-3/32" (the only size I could get at the store here) and it worked fine.
 
I used a 2 1/8" socket from sears this last weekend and it worked fine. I think the 91 is the same...
 
Back
Top Bottom