Locking Hubs...Aisin

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I am currently running the standard, not FJ55 specific ASCO hubs on my '76 FJ40 with the '76 birfields. The end of the stub just chewed a little out of the dial on the hub. I'm sure if I spent 2 minutes with a grinder to bevel the splines some more they would fit fine. YRMV of course...

Nick
 
Degnol said:
I would, but I just put it back together with the 76-78 Birfs (against everyones advice).

I...am....a....dumb$hit.

Ed

ThenI would run Warns or another aftermarket brand hub....I have a set of NOS Ramseys if you need them :whoops:
Butch
 
Thanks, Butch. I have a set of working Warns on there right now. I just like the idea of the Aisins not sticking out so far and being steel rather than aluminum or whatever they are.
Ed
 
Degnol said:
Thanks, Butch. I have a set of working Warns on there right now. I just like the idea of the Aisins not sticking out so far and being steel rather than aluminum or whatever they are.
Ed

The outside "dial" on the Asins are some kind of alloy, not steel, carry a spare hub or drive plate and you will be good.
Butch
 
i did a search and found this thread...it answered some of my questions but i not fully....i have a 1980 with fulltime hubs on it(non selective)...will the asians fit on those axles then...or did they come out with some oddball length axle specifically for those...

or are the fulltime fourwheel hubs stronger and i should leave them on...less moving parts to break
 
Asians should fit. If you've got drive plates now then you won't have to worry as much about breaking them (they are stronger than hubs) but your front drive shaft will be turning 100% of the time (more wear). Thats the beauty of hubs, being able to unlock them and have your front axle free wheel and disconnected from the tires.
 
thanks..thats what i was thinking...but wanted to know if i ever need to change them...they are on a wrecked rig i picked up...1980 FJ40 with 18K original miles on it...lady let her 16 year old drive it....he bounced it off of a cement bus bench and into a building....i think one of the axles snapped in the crash cuz the front end was locked in...but boy is there a lot of nice parts on it....interior is mint...an uncracked perfect dashpad....i wont tell you what i paid for it....you wont believe me
 
Finally a newb that know's how to search...

Yes the asin hubs will fit from 79+ also mini truck hubs. I would recommend removing the driveplates and installing the locking hubs. This way the front end isn't turning all the time. Drive plates are nice for a wheeling truck but it's nice to keep the drag and wear off the front end.
 
actually ive been checking ih8mud for about 3 or 4 years...i just dont post as much cuz i do searches first for my questions....and i have a good source with our local club....not to mention poser is in my neighborhood, and hes no dummy

thanks...not sure what im going to do with this rig yet..r what im going to do with the parts
 
woody said:
bad has it correct....the 76-78 birfs are ~3/8" longer than the 79+ and ALL aftermarket, and that 3/8" wants to shove thru the face of the Aisin lockouts...impossible to install.

There "may" have been Aisins available for the 76-78 model years, designed for the longer birfs, but I've only seen Warn's out there.

Inners are identical from ~1968+ on all FJ40/55's.

Does this mean if I put Longfields in my 1978 that I could then use the Aisin hubs?
 
stinkyfj60 said:
IIRC the Aisin hubs fit '79 and up FJ40/55, 60/62 and solid axle mini's. But isnt the birf from one of these an upgrade for earlier Cruisers and easy to swap? Just a little grinding on the housing right?

correct
 
ok looks like I am on the right track, I have a 79 axle housing with the knuckles and rotors. I am looking for inneraxles birfields and hubs, I believe I have a lead on some 81 axles and birfs. SO there fore I need to buy some Aisin hubs. Where do I get them from, and is Aisin the only brand to use or is there another one? I know I can't use the warn ones. Thanks, Chuck.

PS: used the search function to find this...lol
 
aisin is the brand of choice. search the wreckers for solid axle minitrucks (hilux's) 60 series, or 1979+ fj40's
 
CruisinTiger said:
ok looks like I am on the right track, I have a 79 axle housing with the knuckles and rotors. I am looking for inneraxles birfields and hubs, I believe I have a lead on some 81 axles and birfs. SO there fore I need to buy some Aisin hubs. Where do I get them from, and is Aisin the only brand to use or is there another one? I know I can't use the warn ones.

warn, superwinch can be had new. I'm sure you can find some asin off a mini. I'll look around but I think I sold all the extra's I had... Jan got my last set.
 
Back
Top Bottom