Load capacity 3rd row seats

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 24, 2007
Threads
4
Messages
13
I just bought a used 1995 Land cruiser. I must say this is one of the best forums for any vehicle I have found. You guys really seem to cover a topic in depth. While reading the owners manual I found something interesting that I haven't been able to find in a search. On page 183 Toyota lists the vehicle capacity as 900 lbs without the 3rd row seats and 1155 lbs with the 3rd row. So my question is did they change something when you added the 3rd row. Stiffer springs maybe or did they just make up these numbers while drinking saki one night.

Thanks

Tobin
 
Not sure, but welcome to mud.

Why are you wanting to know this? If you need more load capacity then get some OME or other springs that will handle a higher load.
 
Mostly just curiosity on my part. I found it really strange as I hadn't heard or read about this anywhere. I also wonder if it might explain why the front starts to sag faster than the rear on some land cruisers.

Thanks

Tobin
 
Its been discussed before here, but I disremember the outcome. I think they put in stiffer springs for the 3rd row trucks. Did you search? :D

-Spike
 
I think they put in stiffer springs for the 3rd row trucks.

Spike is correct, the option included stiffer rear springs. There are very few 95+ 80-Series in the US without the 3rd row option but they are out there.

-B-
 
I searched for it but didn't find anything. Maybe I'm not picking the right search terms. I generally try to search before I post. I've been reading this forum for awhile now and can say there aren't many questions I haven't found the answer to with a search.

Thanks

Tobin
 
I searched for it but didn't find anything. Maybe I'm not picking the right search terms. I generally try to search before I post. I've been reading this forum for awhile now and can say there aren't many questions I haven't found the answer to with a search.

Tobin,
Thanks for trying the search before you ask questions. I knew some things that you wouldn't have any way to know since you are new. I did an advanced search (posts only, 80-section only) using Keyword=springs and Author=CruiserDan. I remembered that we had a long thread that covered the different OEM springs in the 80-Series (LC & LX)

When you read the following thread, DO NOT make any conclusions until you read the entire thread. Many of us stated some wrong "facts" early in the thread and as the discussion and research continued we gained a lot of new knowledge on 80-series springs.

Here is the thread: https://forum.ih8mud.com/80-series-tech/45074-fj80-fzj80-vs-lx-coil-springs.html

Here is another thread that is much less valuable but applies to earlier FJ80s instead of the later FZJ80 that was covered in the 1st thread.

https://forum.ih8mud.com/80-series-tech/17011-92-springs-different-than-93-a.html

-B-
 
Cool very interesting. I probably didn't read that one because the title doesn't look like what I was looking for.

Thanks

Tobin
 
Back
Top Bottom