Lights Stuck on Hi

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 30, 2005
Threads
20
Messages
123
Location
Sussex County, Delaware
Last night when I changed from hi to low beams, there was a about a 2 second delay before change would occur. There was not a problem going from low to hi. Today, the lights just stay on hi. The only way I can get back to low is to turn the lights off, and then back on again.

Is this a relay problem, or something else? FWIW...About 6 months ago I replaced the entire turn signal/light/washer assembly because my 2 year-old son broke the stalk off (Since then, he has not played inside the 'cruiser)!!!
 
There is a main headlight relay under the hood, it may be your problem.
 
Update

I checked with CDan to see what his thoughts were before I started. He asked if I had a Slee harness, and I do. I didn't point that out in my original post because, I assummed:) , everyone has one by now.

Well, based on Dan's suggestion, all I did was reconnect the factory wires to get the lights working again. The next step will be to contact the Slee group and see how we can fix their harness.

That is, after I install the sliders I just received from them the other day!
 
Back
Top Bottom