Lights issue from Hell

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 10, 2017
Threads
26
Messages
95
Location
Fayetteville, AR
Where to begin..... Bought a 97 LC about a month ago and installed aftermarket LED tail lights. Noticed that my tail lights started doing funky stuff like one not coming on (at all with lights turned on or braking) while the other stayed on constantly (without headlights turned on or braking). My brake light bar also stayed on along with the rear side marker lights. Even when I turned off the rig, the only way I could get the damn lights to turn off was by tapping the brake pedal 15 times and they'd finally turn off. So after reading up on the forum I realized LEDs don't work on our rigs due to the 24 volt system. So I took out the after market lights and replaced with the OEM and I'm still having the issues. Except this time I'm having all the same issues in addition to my front marker lights are staying on now!!! What in the hell can this be??? From reading countless threads I'm guessing I need to start at the brake light switch above the brake pedal? What would cause the front marker lights to be involved as well?
 
I've also read that it could be a trailer wiring issue. I'm clueless when it comes to electrical stuff.
 
Have you checked your fuses?

Do you know how to use a multimeter?

There's a chance that the trailer harness and controller may be causing you grief. It is pretty easy to bypass. Just need to remove the rear steel bar (5 Philips head screws) and then pull back on the plastic side molding to get to the trailer controller box (small black plastic).

And FYI, our North American Fzj80's are all 12V systems
 
Have you checked your fuses?

Do you know how to use a multimeter?

There's a chance that the trailer harness and controller may be causing you grief. It is pretty easy to bypass. Just need to remove the rear steel bar (5 Philips head screws) and then pull back on the plastic side molding to get to the trailer controller box (small black plastic).

And FYI, our North American Fzj80's are all 12V systems

Is that this box? What do I do to bypass it? I checked the fuses under the hood with a light tester.

black box.webp
 
I don't ever plan on using a trailer on my rig so can I just bypass or remove something to solve the issue????
 
Did your lights work before you put in the LED's?
 
Did your lights work before you put in the LED's?

To be honest I'm not completely sure. I do know that my passenger brake light was on all the time with the LEDs and now that I've gone back to OEM its the DS brake light that's on all the time.
 
The trailer light controller is probably installed using ScotchLok splices. Here's a random video of a heavy-breathing guy showing how they're installed:



To remove each splice, you flip the plastic cover open, then grab the metal part with needle nose pliers and pull it out. If you can't get pliers on the metal part, rip the plastic body apart and pull the metal piece off the wire afterward.

By the way, I doubt that your brake light problem is caused by the trailer module. I still say remove it, but I don't think it will fix the problem.
 
The trailer light controller is probably installed using ScotchLok splices. Here's a random video of a heavy-breathing guy showing how they're installed:



To remove each splice, you flip the plastic cover open, then grab the metal part with needle nose pliers and pull it out. If you can't get pliers on the metal part, rip the plastic body apart and pull the metal piece off the wire afterward.

By the way, I doubt that your brake light problem is caused by the trailer module. I still say remove it, but I don't think it will fix the problem.


Once I've done this, if there's still an issue, what would you recommend as far as next step?????
 
Once I've done this, if there's still an issue, what would you recommend as far as next step?????

Search Mud for threads about brake lights. I'd start by checking all the grounds and the brake light switch. There's a thread showing the brake light switch and return spring location.
 
I had a very similar issue. At the right rear inside the kick panel, there is a electrical connector that is not connected to anything. My guess is it was intended for a trailer wiring harness. I do tow a trailer, but the conversion box was ScotchLok'ed into the harness by the PO. Anyways, enough moisture had gotten into the connector to short between the pins, creating all kinds of goofy and unwanted lighting scenarios. I cut it off and shrink wrapped over the loose wire ends.
 
I had a similar issue, from an aftermarket towing harness installed by PO. After it was removed, everything went back to normal. One thing that I did do, as a precautionary measure, was to apply a little Liquid/brush-on electrical tape to the "bites" in the wiring from the removed ScotchLoks, to prevent corrosion and/or dead shorts. (Black RTV would probably work as well.)
 
To be honest I'm not completely sure. I do know that my passenger brake light was on all the time with the LEDs and now that I've gone back to OEM its the DS brake light that's on all the time.

I'm thinking grounds or trailer harness.
 
I thought I would follow up on this thread. I ended up having a couple of issues going on. The brake light switch above the brake pedal ended up being part of the problem and the trailer converter box (little black box taped behind PS rear panel was toast.
 
First the 24 volt system, the 80 diesel, is all 12v bar the cranking system. Petrol versions AFAIK are all 12v. The brake lights work WITHOUT ignition, tapping the pedal is freeing up the brake light switch, change that first then start to look for the next problem.

Regards

Dave
 
Back
Top Bottom