Leaky front end

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 7, 2007
Threads
5
Messages
40
Newb here.I've been looking for an 80 for a few months and looked at a '94 80 and a '97 LX today.They both have 149k, no lockers and appear to be well maintained mall cruisers.Although each guy is asking more, I think that I can buy either for around $7500.The '94 is a original owner vehicle.He has used Mobil One since the beginning.He has replaced the alt,starter, radiator,a.c comp, belts and hoses (don't know about the infamous short hose) all in the last year.He gave me the name of the shop so I could verify all this.The thing is, I noticed the tell-tale crud at the end of each front axle.No clicking, yet, but I would like to know how much I'm looking at, best and worst case, to repair these.The LX seems to in good shape also, although the owner is not the car guy the first guy was.The leather is perfect, the plastic on the outside has some minor scatches.The front axle is clean.He also gave me the name of his mechanic, but was much less specific about what had been done( both guys were well off and probably just write the check rather than worry about specifics) Oh, and option #3 is another '94, this one with diff. locks, 200k and hail damage...he is asking $4800.Funny thing is these are all within walking distance of my house.Any guidance will be appreciated.Thanks
DSC01145.webp
 
Mine look pretty much exactly like that, no clicking either. You can see a pic in my recent "Coolant Flush post".

I got quotes from between $1,000 and $1,600 and 2-4 days in the Los Angeles area. However, if you have any inclination to do the work yourself and can make friends on this site you can do the work yourself and only spend the $2-300 on parts...cant remember exactly how much, I ordered everything, including bearings, new rotors and 100 series pads. May have been over $400, cant recall exactly.
 
I just replaced my bearing within the last 5 months both side. The crud still there just like yours. I just leave it along until the clicking start.
 
Pic looks just like mine , new seals is the answer. I am gonna do the whole job the 29th with a few gearhead buddies,and a guy from Yankee toys that volunteered to help and he has all the needed special tools etc etc , I am lucky .Check Marvin Crawlers HD seals,they also have a killer deal on rebuild kit and HD seals going on.
 
I did my axle in October with the OEM kit from Cruiserdan, Timkin bearings and races, 100-series pads, all fluids/grease, towels, brake cleaner, and a brake fluid flush for $410 all said and done. Took me about 13 hours with some help and some :beer:s.

ABS sensor that we broke when disassembling the PS cost me an additional $100 and about 0.5 hour to install.
 
Yeah, but isn't there an advantage to gettin on it early?

Honestly??

Not really, unless maybe you're offroading it very hard.

What I mean by that is yes, of course you should fix it, but these things are so well built that you could go a looooong time (I'm talking 10's of thousands of miles) before getting to where it's completely failing or causing other damage.

Welcome,

Curtis
91Fj80, 240K
 
Yeah, but isn't there an advantage to gettin on it early?

Yes, search birf job, it's a routine maintenance job on these trucks. In that housing is a birfield joint that needs to be repacked with grease and the seals need to be replaced at about every 60-80K miles. If you wait until they start clicking, the will need to be replaced, at about $300+ ea.
 
That is an inner axle seal leaking do a rebuild kit, at a minnimum do a seal kit and repack the birfield and bearings and you will be good
 
Yes, search birf job, it's a routine maintenance job on these trucks. In that housing is a birfield joint that needs to be repacked with grease and the seals need to be replaced at about every 60-80K miles. If you wait until they start clicking, the will need to be replaced, at about $300+ ea.


Mine also looked just like this when I bought it, but I knew I was going to have to repack the bearings, replace seals, etc. Cost? Very reasonable at $125, but when I got the wheels off, I decided to replace the right birfeild. I noticed that the mechanic who had done the work prior to my ownership had put the parts on in the right order, but had inverted them, now how the **** he did that is beyond me!
Look at replacing the seals as all have recommended, and when you get to the bearings, look to see if the birf needs replacing. Anyway you look at it, you're still getting one awesome rig!!!

:flipoff2:Happy Holidays....ALL!:flipoff2:
Oh, and :beer:
 
Be very carefull when you have that crud on the knuckle problem, mine had that and on further inspection I found the bottom knuckle studs had broken and only one was left intact and that was loose!

The studs were still in the holes, but as soon as I put a spanner/wrench on the nuts, the stud just fell out, I was horrified, I had to remove the whole knuckle and drill out the broken off studs, if yours are ok, I would still suggest that you change the studs for the new type and really loc tite them in place.
 
I hear you on that.I was looking at another '94 and asked the guy if he had any major work done,He told me they had to "do something" to the front end after the "wheel broke off"!!!
 
Back
Top Bottom