Last Electrical Gremlin

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 11, 2004
Threads
182
Messages
2,250
Location
Kansas!
i have been thru all the electical on jakes 40..repair...replace..with lots of help from guys here on the board...but some things you just gotta figger out for ya self...had a battery drain...it was pretty bad...we just got in the habit of removing a battery cable...not good enough...jake wanted it fixed..so i started reading on how to diagnose the problem and found a link to information on parasitic drain.....to make a long story short...there it was...one short sentence...remove the key!....we must have something going on with the switch...remove the key...no drain....simple enough..we will just stop leaving the key in the 40!...:doh: ..we may change the switch eventually but for now that works!....just thought i would share that.

osagecruiser
 
The ignition key itself has zero impact or effect on an electrical draw, relative to it being in or out of the ignition switch. With that said however, on the older trucks that have the ignition key and switch assembly on the dash, there is an accessory position that if you turn the key all the way to the left and leave it there, will power anything on that circuit. The off position is with the key in the vertical position, and able to be removed from the switch assembly.
 
poser
the switch is on the dash and is very vague as to off or accessory position..i believe removing the key is forcing the operator to move the switch to the off position in order to remove the key from the switch...the switch is the original and is very worn.....so since the key does,nt really affect anything...removing does...by causing it to be placed in the off position...make since...that said i just remebered i forgot to remove the key when i put it in the shop tonight....:doh:


osagecruiser
 
Steve, you are right about the accessory position in the switch, but as far as I know, there is no wire in the stock wiring configuration attached to the ACC post. I wouldn't think (but I've never tested it to be certain) there should be a draw if the key is set to the ACC position. That said, since I've never tested it, I make a habit of not leaving the key that way. :D

It seems to me that if having the key in the switch in the off position results in a draw, then there is a short in the switch, and it is present potentially at all times (you could, of course, test this out by pulling fuses and seeing if the draw remains present when all of the switched circuits are taken out of the equation with the key in the on position as well). I would consider that a fire danger potentially, and would want to replace that switch sooner than later.
 
Last I checked, new ones are available from Toyota for the application. The new keys have a big fat head on them. That's what I put in my 45.
 
OEM ignition switches are still available new...not a lot of money, and come with two new keys....


Just because a stock wiring harness does not have anything to the switch does not mean that a PO did not put something on it, or that the ambigui-switch is really not "OFF" when in the off position....


:beer:
 
IDave said:
Last I checked, new ones are available from Toyota for the application. The new keys have a big fat head on them. That's what I put in my 45.


Those are for the old 55's....


You can get the small key ones still....just need to have a parts guy to get you the correct one, not the first one that he sees on the parts list/film.... ;)


:beer:
 
Poser said:
Just because a stock wiring harness does not have anything to the switch does not mean that a PO did not put something on it, or that the ambigui-switch is really not "OFF" when in the off position....


:beer:

Indeed. :D :beer:
 
Poser said:
Those are for the old 55's....


You can get the small key ones still....just need to have a parts guy to get you the correct one, not the first one that he sees on the parts list/film.... ;)


:beer:

I'll have to speak to CDan about that. ;)
 
Back
Top Bottom