Larger tires and shift points

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 2, 2007
Threads
39
Messages
233
Location
Lake Worth, Fla
I just put 35's on my truck in place of stock tires. I noticed that the shift points appear to be below red line now by about 400rpm. Are the shift points related to speed instead of RPM? Just curious.
 
I just put 35's on my truck in place of stock tires. I noticed that the shift points appear to be below red line now by about 400rpm. Are the shift points related to speed instead of RPM? Just curious.


Larger tires will offset the gear ratios. But I hardly ever push mine anywhere within 500-1000 rpm of redline unless I am passing. I'd go easier on it until you find out what gear ratio you should go with.
 
the shift points change.

there's a long drawn out discussion somewhere in the archives...I don't recall if it's speed or RPM related.
 
I can only assume that it must be speed related only because the larger tire would spin slower at the same speed. Certainly the 4.5L motor has enough power to pull redline in 1st gear, on flat ground, w/35" tires. Pulling redline in 4th is another issue.
 
Back
Top Bottom