KZJ73 / R151F / ????? Year 1994

[ArnaudBJ42]

So, I begin to understand

I have a R150F speed box.
I haven't a RF1A Tcase !

But, what is the reference of my Tcase ?
It's the Tcase of the picture ONE.

Thanks,
Arnaud

 

[wesintl]

But, what is the reference of my Tcase ?
It's the Tcase of the picture ONE.

Arnaud.. what region of FR are you in?
That would be what we call a Split cruiser case. (2 halves bolted together) Honestly I don't know what the designation is

Dave, I'm assuming those have 8" ring gear 3rd's like the hilux?

Wes

 

[beanz2]

So, Dave, what is needed to change my low ratio in my Tcase ?
Just my low ratio, no my high ratio !

The whole for a maximum of 500$, if it's possible.

Thanks,
Arnaud

The KZ has a 10*43 ratio on bridges (bridges ?? I think it's the same word in English !!)
Help me to learn english !!!

Hmmm, I think you already have the lowest ratio for factory transfer gears, 2.29:1. Anymore than that you have to go aftermarket then the costs really go up from there. Check if Marlin (www.marlincrawler.com) has a Hilux reduction gearbox adapter to work with the R151 and the cruiser split case, but his stuff will cost more than $500

What you call "bridges" I think refers to the axle differential. Yep, you have the 4.30 ratio diffs.

Dave

 

[ArnaudBJ42]

Arnaud.. what region of FR are you in?
That would be what we call a Split cruiser case. (2 halves bolted together) Honestly I don't know what the designation is
Dave, I'm assuming those have 8" ring gear 3rd's like the hilux?
Wes

I'm French.
Tcase of my KZJ73 haven't reference, probably.
All my research say me that I haven't solution at less than 1500$ (
It's too for me !
Maybe I can adapt gear of tcase of BJ4*/HJ6*/BJ7* !

 

[beanz2]

Arnaud.. what region of FR are you in?
That would be what we call a Split cruiser case. (2 halves bolted together) Honestly I don't know what the designation is

Dave, I'm assuming those have 8" ring gear 3rd's like the hilux?

Wes

I don't know what the split case is called either. Funny that all the other transfer cases Toyota makes has had a name designation, but this one's is not well known. Maybe Landpimp knows it, he knows Toyota esoterica.

Yes, Wes, these are 8" ring gears, the front is reverse cut though. The 4.56 9" diff that fits our axle housings come in the PZJ7x rear axles. Those are available with e-lockers too. Yumm.

Dave

 

[ArnaudBJ42]

Hmmm, I think you already have the lowest ratio for factory transfer gears, 2.29:1. Anymore than that you have to go aftermarket then the costs really go up from there. Check if Marlin (www.marlincrawler.com) has a Hilux reduction gearbox adapter to work with the R151 and the cruiser split case, but his stuff will cost more than $500

What you call "bridges" I think refers to the axle differential. Yep, you have the 4.30 ratio diffs.

Dave

Yes, 2.28:1 I think !
Every dealer US or AU say me that they don't do anything for land cruiser Tcase.
I have just marks4wd, but it's too expansive !
Bridge = axle. Because, in french, bridge and axle are the same word !

I know that Hilux Tcase aren't the same that my tcase.

So, I keep my tcase with 2.28:1, I haven't choice !


Thanks,

 

[ArnaudBJ42]

I don't know what the split case is called either. Funny that all the other transfer cases Toyota makes has had a name designation, but this one's is not well known. Maybe Landpimp knows it, he knows Toyota esoterica.

Yes, Wes, these are 8" ring gears, the front is reverse cut though. The 4.56 9" diff that fits our axle housings come in the PZJ7x rear axles. Those are available with e-lockers too. Yumm.

Dave

My Tcase is the same that the picture ONE on YOUR post ("10-21-04 07:02 AM beanz2").

His name is Tcase of land cruiser !!!!!!!

 

[wesintl]

I'm French.

Yes.. I figured as much... My sister lives in Amiens I usually try to visit often... My brother just went for the grape harvest last 2weeks at their vinyard near Bourgueil... Pretty country and great wine.. esp homeade

Oh.. been trying to talk the inlaws into a hzj79 plateau for hauling
cio.

 

[denis]

So, I keep my tcase with 2.28:1, I haven't choice !

you could still give it to me if you hate it THAT bad

 

[ArnaudBJ42]

Yes.. I figured as much... My sister lives in Amiens I usually try to visit often... My brother just went for the grape harvest last 2weeks at their vinyard near Bourgueil... Pretty country and great wine.. esp homeade

Oh.. been trying to talk the inlaws into a hzj79 plateau for hauling
cio.

Oups, sorry ! Me and English ....
So, Amiens is at 1 hour by car of Paris at the north !
I am at 1 hour at the south of Paris.
But, I know Amiens, my parents lives near Amiens.
If you go French, tells me, and we try to do one day with 4x4 !

 

[ArnaudBJ42]

you could still give it to me if you hate it THAT bad

No denis,

You always want all things for nothing !!
I need $$$$$$, a lot of

 

[Satamax]

Hi everybody!

Well, brand new here, Arnaud dragged me over here! My name is Max, and i'm owner of a 87 HJ61! Arnaud, i think i have the solution for you!!!!!!!!!!

A dual toyota transfer case! since you have two T cases! I've seen it done, may be on Erik's toy 4X4 page or somewhere! You link the first one to the second one, extensive work, but might be done cheaply enough! What do you think guys?

Best regards.

Max.

 

[ArnaudBJ42]

since you have two T cases! I've seen it done, may be on Erik's toy 4X4 page or somewhere! You link the first one to the second one, extensive work, but might be done cheaply enough! What do you think guys?
Max.

Yes, I have two T cases.
But does a land cruiser T case can be matted on a land cruiser T case ?
I think it's not possible !

A solution of kit of gears is "cleaner" and faster but .... expansive.