Knocking when I turn

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 27, 2007
Threads
19
Messages
175
Location
El Monte, CA
I just got my rig lifted on Monday. I've been driving it the whole week. Last night I heard a knocking sound coming from the front passenger side everytime I make a left turn. It usually occurs only when I am stepping on the gas while making a left turn. BTW I haven't put in the OME Castor Bushings yet, could this be the cause? If not, what is it?

Thanks in advance!
 
When was the last time you did the birfs? Sounds like a knuckl knock...if it was your drive shaft you wouldn't have to be turning to hear it.
 
I've never done it. I just bought the truck in July 2007. How much will it cost to do the birfs?
 
I've never done it. I just bought the truck in July 2007. How much will it cost to do the birfs?

You can do it youself and save some money, but if a dealership did the work and the axle stubs(birfields) are not damaged you can expect to pay north of $1000 for just the labor not including parts (seals, etc...).

You mentioned you are hearing a knock. You would be hearing more of a clicking sound if it was your birfs. Did you hear the knock before the lift? Could it be a spring not seated correctly? Just a thought....

Good luck.
 
dont be so quick on the birfs... i have a knock as well. right after the 4" slee lift when on. the birfs can be described as more of a click.

i have not found the source yet. if i were you i would get under there and tighten the hell out of your panhard rod bolts.

then, take a look at the tie rod ends and the drag link ends. do a search for a post from user: landtank on the issue. he gave a great write up with pics. once you have ruled all of that out post back and lets see where you are. FYI, it shouldnt take you more than 1 hour to get through what i just mentioned.
 
You mentioned you are hearing a knock. You would be hearing more of a clicking sound if it was your birfs. Did you hear the knock before the lift? Could it be a spring not seated correctly? Just a thought....

Good luck.

i actually didn't hear it before the lift.


peepers said:
dont be so quick on the birfs... i have a knock as well. right after the 4" slee lift when on. the birfs can be described as more of a click.

i have not found the source yet. if i were you i would get under there and tighten the hell out of your panhard rod bolts.

then, take a look at the tie rod ends and the drag link ends. do a search for a post from user: landtank on the issue. he gave a great write up with pics. once you have ruled all of that out post back and lets see where you are. FYI, it shouldnt take you more than 1 hour to get through what i just mentioned.

Thanks for the info! I wouldn't want to spend money on something that doesn't need to be replaced yet. Yea,it's not a click. Sounds like someone is under my truck and pounding on the floor....lol
 
...

then, take a look at the tie rod ends and the drag link ends. do a search for a post from user: landtank on the issue. he gave a great write up with pics. once you have ruled all of that out post back and lets see where you are. FYI, it shouldnt take you more than 1 hour to get through what i just mentioned.

https://forum.ih8mud.com/80-series-tech/137411-front-axle-evaulation-faq.html

fyi, when you're doing the test (ie rocking the tire) any movement is not ideal. ANY movement. I did the test and noticed some movement when rocking at 3-9o'clock but didnt think it was enough to worry about....I ended up replacing the tie rod ends a week later after not being able to get an alignment to hold. So keep that in mind, any movement = bad
 
https://forum.ih8mud.com/80-series-tech/137411-front-axle-evaulation-faq.html

fyi, when you're doing the test (ie rocking the tire) any movement is not ideal. ANY movement. I did the test and noticed some movement when rocking at 3-9o'clock but didnt think it was enough to worry about....I ended up replacing the tie rod ends a week later after not being able to get an alignment to hold. So keep that in mind, any movement = bad

I haven't checked the movements yet, i'll check it when I get off work. I was underneath the truck last night and I noticed that the boot where his finger is pointing to has a small tear.

attachment.php
 
I got it aligned today and the knock went away:)
 
Back
Top Bottom