Just an introduction

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I guess that head gasket is a big problem on these as much as yall mention them.

I prefer to say the HG on the 1FZ-FE is an "issue" rather than a problem. And there is no denying that this is a significant issue. We have found that there is NO pattern to the failures. Vehicles with little to no maintenance have gone over 300k and are still running with the original HG. Vehicles have failed early at < 60K. Original owners with over-the-top cooling system maintenance have had the HG fail ~150k miles. No engine is immune and no engine is guaranteed to have a HG failure.

The good news is that we have had no reports of the improved (ie replacement) HG failing after replacement of the original. Toyota changed the design of the HG after US production ended in 1997.

-B-
 
A Limestone county welcome, Chris :flipoff2:

If you're in this area and would like to drop by to kick some tires or whatever, PM me.

:cheers:
 
So I should find one that has had the HG replaced with the new Toyota HG then.

Fat chance that you'll find one that already has the HG done with documentation that would let you know it is the superseded part.

-B-
 
Welcome aboard. I never did sell my XJ when I bought my FZJ. They are both great rigs, the FZJ is just great in a different class. You will find all the tech you need here. +2 on the kids in back on a hot summer day. I moved here from J'Ville and don't miss hte summers. The FZJ fits two car seats and an adault in the second row comfortably.

Good luck on finding a rig. BTW, I found mine on cars.com if that helps.

:flipoff2:
 
Hey Crusier, I am in Huntsville. So it is nice to know a local on here.

Yeah I bet I can't find one with the documentation but I will try. Right now I am coughing up another 750 to rebuild a head on my 360. That is both heads rebuilt within 3 years of having the whole motor rebuilt. It is killing me. I can't save for a Cruiser if I have to keep paying for the jeep. AHHH!!!
 
I searched for 6 months before I found one. It was the right color and year but no t locked. Nonetheless I found it on autotrader.com after looking at 4 or 5 different e-commerce sites.

When and if you get one install the 100 -series rotor and pads on the front. I don't wheel my vehicle, no lockers, but I already have 16k miles on a replaced set that looks like it has 70% more wear to it.
 
When and if you get one install the 100 -series rotor and pads on the front.

The 100-Series front pads will fit without shims. The 100-Series front rotors will not work on the 80-Series.

-B-
 
Back
Top Bottom