Jump Seat Removal

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 9, 2013
Threads
21
Messages
209
Location
Bay Area CA
I was able to obtain a period appropriate seat of short jump seats for my 1983 FJ40 and I want to swap out the current seats with the new ones.

There are four bolts that secure each seat. Two of them are definitely through bolts into the wheel well. The other two attach the back of the jump seat to the side wall of the tub at the top channel.

My question is this: Are the top two bolts through bolts (i.e. with a nut) or am I just a nut who can't figure out if these are through bolts? I've felt around and that tub top channel seems sealed and not accessible.

I dread the possible of loosening the top two bolts and hearing that sound of a nut hitting metal and not being able to reinstall the seat properly.

Thanks for any help n this.
 
the nuts should be welded capture nuts, like the ones that bolt the hard top to main body. same with the the ones going into wheel well. they should be permanently mounted. same with seat frames up front, etc. they are all over the 40.

hope this helps. now if PO modified it, you are on your own.

andy
 
Back
Top Bottom