Is This Damage?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 17, 2004
Threads
166
Messages
1,929
Location
Humboldt Nation
DSC09345.sized.jpg


DSC09346.sized.jpg


DSC09349.sized.jpg


Noticed the line running around the shaft.
Looks like it was made this way but I'm no expert.
:cool:
 
The line is caused from the pulley running on the seal & it cutting a line in it over time....... NOT A ISSUE!!

If you want to, take some emery cloth & sand this.... it may help but will probably not remove the slight grove.

Again this is not a issue.
 
Yup, that's normal wear. You can buy a Speedi Sleeve that slips over the worn area. Did that repair to all 3 of my 22RE equipped trucks w/ great success.:)
 
Excellent.
Onward.
:cool:
 
make sure you do that up real tight, or its coming off real soon.

Hows about 253 ft/lbs. Just what the FSM ordered.
Just have to borrow a large enough torque wrench from work today.
:cool:
 
All torqued down and tight. 253 ft/lbs.
FSM doesn't specify anything for the threads. I went without.
Are you supposed to PUT ANYTHING ON THE THREADS?
Thanks again,
:cool:
 
Back
Top Bottom