Intro and Advice

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 22, 2007
Threads
100
Messages
461
Location
Germantown MD
Hi, I just got my '95 FZJ80 last week after lurking and reading on this board for 2 months. The truck has 116K miles on it and included a folder full of synthetic oil change reciepts, synthetic diff, t-case and tranny fluid services (amsoil) , FSM and electrical circuit manual.

The truck had new seals put into the axles in 2002, new fan clutch around the same time. Some of the water hoses look new, belts look fine ( i know that doesn't mean much), and PHH doesn't leak but looked a little swollen, may have been the mirror I was using to catch a peek. The truck idles solid, pulls strong, and got me 13.### MPG that last tank of 87 octane in the city, and temp needle is always just below 1/2 way with AC on.

I was planning on PMing the headgasket along with full tune-up, hoses, belts, fan clutch (one put in was not blue base) and I had budgeted for it when I got the truck. I was still questioning whether I should do the HG when the other day, in my paranoid state, I opened up the oil filler cap and looked under it....I found a small amount of milkshake stuff....

....now the issue is that I am in the middle of remodeling my basement and there is only one of me. I also wanted this truck up and running by April so I am now looking to have this done by a mechanic. The issue is that I have always done my own work (but never a HG)and I don't have any experiences with local mechanics. I was talking to the mechanic that did the state inspection for me and he told me that he has done a bunch of 3.4's....how different are these 2 engines besides displacement? I asked him what coolant he would use on a toyota just to see what he said and he stated always toyota red. Doesn't mean much to me but I guess I just wanted to see what his reaction was. I guess it was good because he didn't give me 'deer in headlights' reaction.

I also got a recomendation from my local board but that place is 1 hour away. I have emailed other local members to see where they got their HG work done and I am waiting for a reply.

If I come up empty handed, how do I "interview" mechanics for this type of work?

sorry for the long post

edit: I live in Maryland, 30 min. from DC just in case you guys know anyone local.
 
Last edited:
:flipoff2: Welcome! Lots of good info and helping hands around here. Im sure someone in your area will chime in suggest a good local wrench. I know you said your busy right now, is the cruiser your DD?

Clint-

BTW: pics please!
 
fixed profile

fixed my profile...I am in Germantown MD.

A board member has tracked down a couple of leads for me and I will check them out.

Fortunately this is not my daily, I have my little acura for daily duties so the cruiser can sit tight and await it's surgery. It will be just a little bit harder to make Home Depot runs though:):)

So back to the head gasket issue, I ordered Doug's video just to see what the job entails, but I am still leary of taking on a job like this with my basement half finished. I know if I start on the cruiser my basement will not get done.

Can any competent mechanic tackle a job like this or should I really look for someone who has done a HG on an 80 specifically?

Like I said, the mechanic that did the inspection state inspection on the 80 says he has done a bunch of 3.4's, but I know he hasn't done an 80 because he asked if it had a 3.4 in it when I dropped it off.
 
I have decided to let my local mechanic do this job. They are two guys that run the entire shop, one has done a bunch of 3.4s and the other used to be a tech at a Lexus dealer.

They said that labor will be $874 not including machine shop charges. They recomended a local machine shop that has been around for 20 years. They also said that the labor price includes changing out any part that I bring them: hoses, belts, fan clutch etc.

I will have them yank the starter and alternator so I can freshen those up too, I can't let them have all the fun:):):)

Will keep you guys posted.
 
Back
Top Bottom