intermittent vibration/rumble on deceleration

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 3, 2009
Threads
17
Messages
100
Location
Montreal, Canada
Hey guys, I did a search and didn't find anything relevant...

I've been having this issue for about two weeks, its intermittent but its getting more frequent.

When you usually let go of the gas, so the truck coasts/decelerates, the truck goes in "neutral" or overdrive, and the rpms drop to almost idle, but in my case, sometimes the rpms will stick, like the truck stays in gear, and I feel a vibration/rumble/grinding noise coming from the driveline.

At first it did it for about a fraction of a second, but now its doing it more often and it can last a good second and a half...

I've noticed that if I blip the gas pedal, it'll stop...

Girlfriend thinks the truck is going to explode so id like to know what could be wrong to get it fixed...

By the way its a locked 97 lx450 all stock except an arb bullbar, a snorkel and me driving it

Thanks
Nick
 
Check if our exhaust is rubbing the frame somewhere. That's what it was or me.
 
I get it every once in a while the GRRRR sound when I am on the highway and I let off the gas it happens for like a couple of seconds then is gone
I pretty mine is coming from the front drive shaft ujoints
But I have not bothered to confirm it either, truck does not get driven that much
 
Tellin you guys, check your exhaust hangers. Especially if you feel it under your seat (rhd). That's what I had, left of the gas above 90kph and grrrrrrr.
 
I get it every once in a while the GRRRR sound when I am on the highway and I let off the gas it happens for like a couple of seconds then is gone
I pretty mine is coming from the front drive shaft ujoints
But I have not bothered to confirm it either, truck does not get driven that much

Definitely the front driveshaft ujoints. Mine barely does it on decel if i turn my pinion angle up a bit
 
Have this exact same issue, even after replacing the front AND rear drive shafts with brand new OEM drive shafts... I know my exhaust hanger rattles a bit on idle but maybe that really is what is going on here... anyone have any resolution?
 
Back
Top Bottom