Intermittent CEL

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Brentbba

Former Golfer
SILVER Star
Joined
Mar 27, 2003
Threads
449
Messages
11,094
Location
OC, CA
Drove the truck to work yesterday for the extra armor protection from crazed SoCal drivers that won't slow down when it rains. She idled rough at the beginning and eventually threw a CEL. It went away after a few minutes. Did the same thing when I went to lunch and again going home. It was not on when I got home last night.

Question - will the ECU still have whatever code it was in memory until I pull the ECU fuse to reset everything? Was at Red Cross last night and didn't have time to pull the code.

History - truck has a very, very long history of code 25/26 as it eats O2 sensors as a snack about every 5 years or so. It's a '94. Had a code 26 a little over a year ago, pulled the fuse to reset and see if it would come back and it didn't for over a year. Threw same 26 about 2 months ago, did the reset and it came back so I replaced the O2's with a set of OEM from CDAN before he rode off into the sunset and everything has been fine up until yesterday.

Will report back when I pull the code.
 
I have had issues with codes 25&26 forever. I believe it have tracked it down. The open/close circuit relay under the kick panel is showing faulty. I just replaced my O2 sensors 2 weeks ago with Denso's and it did not touch the issue. I have a new relay on the way and I'm hoping that's the culprit. I will keep you posted. BTW have you checked your ECT sensor yet? I replaced mine yesterday for s***s n giggles with no success.
 
Be interested to hear back from you on the O2 relay. Why would the ECT sensor throw a rich/lean code? I'll know more when I actually pull the code tonight with my trusty paper clip diagnostic tool!
 
the ECT sensor is on the possible list of things to throw the code.
 
Pulled a code 26. That's usually just been O2's but shouldn't be as I just replaced those a month or so ago from a code 21. Used OEM sensors.
 
25/26 can be quite a few different things.
 
The FSM is clear, if you read between the lines anyway, that 25/26 can be caused by a rough idle.

You know the idle was rough, so the code isn't telling you anything you didn't know.

Check for intake leaks, vacuum leaks, etc. Gummed up idle air control valve can cause these problems too.
 
Been thru FSM before on this code. No time or inclination to do myself right now unfortunately.
 
Been thru FSM before on this code. No time or inclination to do myself right now unfortunately.

It's just that the rough idle can be caused by so many things. The codes themselves don't help here.

There is something like 10 feet of vacuum line on the 93/94 1fz-fe. I know because i replaced all of mine. Even the ones under the throttle body. And yeah some were cracked.

or it could be a broken vsv, or anything else that could lead to unmetered air at idle
 
Agreed! Outside the big intake tube, all the rest of those lines and vsv are still original.
 
Back
Top Bottom