Hi,
Due to dust in the contact the interior light/roof lamp did not work, but before I knew that I made a measurement of pin 1 and 2 on I22.
With the door closed:
Pin1 / grund was +13,7V
Pin2 / grund was +13,7v
With the door open:
Pin1 / grund was +0,8V
Pin2 / grund was +13,7v
Then when I connected the roof lamp to I22 again and it was free hanging with no ground it lit ??...
Can someone explain me how ??..
Br
Due to dust in the contact the interior light/roof lamp did not work, but before I knew that I made a measurement of pin 1 and 2 on I22.
With the door closed:
Pin1 / grund was +13,7V
Pin2 / grund was +13,7v
With the door open:
Pin1 / grund was +0,8V
Pin2 / grund was +13,7v
Then when I connected the roof lamp to I22 again and it was free hanging with no ground it lit ??...
Can someone explain me how ??..
Br