Intercooler Plumbing

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 2, 2004
Threads
178
Messages
1,417
Location
Athol, MA
The most time consuming part of my turbo build has been locating the intercooler and all the associated plumbing. I know that using mostly steel tubing and limiting the number of silicone joints is prefered to reduce the number of places I could have a leak. My question is, I have a very complicated/tight place that I'm trying to route one of my cooler lines, can or has anyone used flexible stainless steel exhaust tubing as intercooler ducting? Will the ribbed nature of this type of tubing cause turbulance issues that I would need to be aware of or preclude its use?
exhaust tubing.webp
 
My first thought was how sure are you that the flex tube seals and can it resist the boost pressures you are considering? You could test by capping one end and hooking the other up to a bike pump or air compressor - kind a cheap leak down test.

Karl
 
Back
Top Bottom