Injector problems

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 26, 2007
Threads
1
Messages
3
Hello to all! Newbie here.

I've been in and out of this site for a while, but never had a problem and needed to sign in for a question until now.

I've bought a 94 FZJ80 for my wife about two years ago. I never had any problems, but it always seemed a little weak to me, and only gets about 7-8 mpg.

I gave it a tune up a couple of weeks ago. Plugs, wires, dist cap, and rotor.

Last week she called and said its missing and smoking. I checked it out and limped it home.

I checked it out at home and it did have a bad miss and fuel was dripping out of the tailpipe.

I pulled the plugs and cylinders 1, 2, and 3 were clean. Cylinders 4, 5, and 6 were black.

All other checks in the fuel system were ok, so I bought a set of NOID lights. Cylinders 1, 2, and 3 all flashed normal. Cylinders 5, and 6 stayed on steady, I did'nt check #4 because of too much stuff in the way.

My guess is computer. I wanted to check you guys opinions before spending a bunch of money.

Thanks!!
 
Hello to all! Newbie here.

I've been in and out of this site for a while, but never had a problem and needed to sign in for a question until now.

I've bought a 94 FZJ80 for my wife about two years ago. I never had any problems, but it always seemed a little weak to me, and only gets about 7-8 mpg.

I gave it a tune up a couple of weeks ago. Plugs, wires, dist cap, and rotor.

Last week she called and said its missing and smoking. I checked it out and limped it home.

I checked it out at home and it did have a bad miss and fuel was dripping out of the tailpipe.

I pulled the plugs and cylinders 1, 2, and 3 were clean. Cylinders 4, 5, and 6 were black.

All other checks in the fuel system were ok, so I bought a set of NOID lights. Cylinders 1, 2, and 3 all flashed normal. Cylinders 5, and 6 stayed on steady, I did'nt check #4 because of too much stuff in the way.

My guess is computer. I wanted to check you guys opinions before spending a bunch of money.

Thanks!!


Did you pull the plugs twice; ie: tune up, and then the problem?

if so, how did the plugs look at the time of the tune up?

Were the plugs black and oily looking?

Fuel dripping out of the tailpipe sounds like injectors stuck on/open
and/or cylinders not firing.

Out of my league.

Where are the experts?

G
 
Your Check Engine Light has GOT to be on, no??

If so, the codes are easy to check; we'll show you how.

Bad computer is not likely. Stick around and we'll probably get 'er figured out.

Welcome,

Curtis
 
I had the same plug problem, 123 were clean and 456 were carboned up.
A short time later the CE light came on with an O2 code. Have not pulled the plugs after I replaced the O2.
My mpg have not changed and get 11 to 14 mpg.

What are NOID lights?
I use the timing light to see if wires are getting spark when running.
 
Your Check Engine Light has GOT to be on, no??

If so, the codes are easy to check; we'll show you how.

Bad computer is not likely. Stick around and we'll probably get 'er figured out.

Welcome,

Curtis

Yep, the check engine light is on. I did swap the O2 sensors thinking I could check them that way, but it didn't make any difference. I didn't think about resetting the computer though.

I would like to get the error codes, but the Haynes repair manual says you can't get them yourself for a 94. Edit: You can for a 94, but not on a 95 or 96.

BTW, a noid light checks the signal to the injector. And by 4, 5, and 6 staying on steady instead of a pulse, I feel sure it's electrical. I'll recheck all of the connections just incase it's something simple. Sometimes the simple things are easy to overlook and give you the most trouble.
 
Last edited:
Just an update to let everyone know what I found. I did replace the ECM and it worked great for a while, then the same thing happened. That really messed with my head. Everything pointed to a positive short. I traced the circuits back to the ECM and it turned out that it was a bad plug on the harness on the ECM. Because of the bad connection on some of the positive sides of the injector circuit, and the injectors share the same ground, the signal went backwards to the injectors that were misfiring. Signals from multiple working injectors feeding into the others is what caused the "steady" signal on the misfiring ones. Hope this can help someone later on. Doesn't it always turn out to be the simple things that drive you nuts?
 
Back
Top Bottom