info on split rims

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 6, 2002
Threads
243
Messages
3,587
Please answer me a naive question: what is the big advantage of a split rim? how easy is it to work on them? any special tools required?
thanks,
J
 
they are dangerous to work on, but can be fixed in the middle of know where with a hammer and not much else I think.

alot of tire shops won't touch them.
 
...there is no advantage to a lock ring wheel unless you are doing a original collector. the safety factor of matched parts (wheel & lock ring ) damaged lock ring/rust having to run a tube are not wirth the chance of personal injury!!!!!!!!! 20years in the tire biz.I wouldn't want one.
 
Split rims are like a lot of things. If you don't know how to use them then you shouldn't touch them. That said, Toyota split rims are safe, and easy to work on. The old school dual ring style splits are the dangerous types, and it was these style rims that caused most insurance carriers to stop most tire shops from working on splits because they took off some heads. Different design than most light truck splits, including Toyota.

In most every other part of the world where Toyotas are sold, split rims are available. It was one of the most requested item when Toyota asked Australia what options they wanted on the 78/79 when they redesigned the 75 series.

I like them, and I will continue to run them.
 
Avoid split rims. Previoulsy working in tire shop I've heard of veteran professionals being killed by split rims coming apart. This usually occurs while airing the tire back up and having the lock ring not quite seated right. All tires stores I know of that will touch split rims air them up in a cage as a precaution.
 
On landcrusier rims I can't figure how you could have the ring not seated right and not see it. The shape looks like it is designed quite well. I have not worked on any other kind of splits tho. I once had a set of nissans but I got rid of them quickly, too much backspacing for cruisers and useless tires.
 
Pic request

I have no idea what you guys are talking about. Can someone post a pic of a split rim and the lock ring, etc. Just trying to learn.

Thanks,

Sean.
 
this is a Toyota split rim...the part of the rim at the tire's bead is a removeable locking ring. here's a better explanation than I could give: http://www.4wdonline.com/Wheels/Split.html

Steve
split1.webp
 
No personal experience or urban myths to share about this, but a safer design would place the "split rim" on the opposite side of the wheel from the valve stem.
 
or you could chain or herc strap while inflating. can't be anymore dangerous then winching a serverly stuck vehicle. lots of things are dangerous. use safety steps to help eliminate them.
 
I wrap a chain around the wheel (through the wheel center and around) just incase something was to happen. It never has. You put the ring in place, add some air, take a hammer and bang on the rim a bit to make sure it is properly seated, and then air up, bang on, air up. You can tell just by looking at a distance if you're going to have any problems.
 
ROOSTER said:
there are a lot of unsafe recommendations posted here if you would like good information on this topic . Here is a web site that does training for tire techs. www.rma.org

Could you be more specific on that site as to where it would be applicable to splits? The search doesn't function, and everything else linked on the site basically common sense.
 
Back
Top Bottom