In case anyone loses the little screws that hold in the AC Blower resister.... (1 Viewer)

[caladin]

In case anyone loses the little screws that hold in the AC Blower resister.... MY best guess is they are pan head phillims m3 x 10mm.

I had a panhead m3x12 that worked just fine in my assortments.

Thought that would save someone buying several sets "just to be sure" like I did

The resistor seemed to work, but I didn't run it long enough to really test out if it fixed the breaker blowing issue I'm chasing.
Maybe next week.


Eric-

 

[caladin]

In case anyone loses the little screws that hold in the AC Blower resister.... MY best guess is they are pan head phillims m3 x 10mm.

I had a panhead m3x12 that worked just fine in my assortments.

Thought that would save someone buying several sets "just to be sure" like I did

The resistor seemed to work, but I didn't run it long enough to really test out if it fixed the breaker blowing issue I'm chasing.
Maybe next week.


Eric-

FYI M1. 0 is way too small

That's my left pinky at the bottom of the pic for scale.

If I ever need to screw a gain of sand to a mote of dust, I'm set!

E-