Ignition

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 10, 2006
Threads
99
Messages
501
Location
The Ghetto
My SBC 350 is having issues starting lately. It'll turn and turn but that's it. I have a HEI and I replaced the cap, rotor, coil. I have spark on the plugs. It seems that sometime when I fool around the wiring in the back that come out the dist it'll start. The coil and tach wires are hooked up. What's the deal?:doh:
 
Well, the wires from the dist body to the cap. They come directly out of the body of the dist. I know common sense tells me to replace these but do they sell individual wire harnesses for an HEI?
 
I would check the connections first, might be as simple as a loose terminal that can be easily fixed. You can buy the harnesses, just need to know how many pins is on the module, most are 4 pin. Another option is the junkyard.
Here is one place you can get them new, I'm sure there are many others including the Chevy/GM dealer.
http://pertronix.carshopinc.com/pro...D9007?osCsid=dd8d637ece632ef8addb7514436584da
 
Back
Top Bottom