Ignition question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 4, 2004
Threads
215
Messages
2,110
Here is the story, I replaced an F engine in a 73 FJ40 with a late model 2F 81 I think. I kept the distributor and ignitor for the new setup and I had a weber carb on the old engine, I put these together and I get a terrible chugging sound when I try to start it, It's like I'm missing half of the cylinders, I have newer plug wires and new plugs. I put the voltage to the ignitor so that the + voltage gets to the + side of the coil. still runs like crap. I aligned the distributir and static timed it. The carb is not dumping gas, Do you suppose I damaged the pickup in the dissy or some other thing that would cause it to proform so poorly? Larry
 
Was your replacement engine running OK previously??
 
Yes it was, I actually solved my own problem, I extended the leads from the distributor to the ignitor and I had them rolled, I hate to fess-up to that but some times you need to look at what you did last, thanks, Larry
 
Back
Top Bottom