I sprayed my wheels today.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 14, 2006
Threads
47
Messages
529
Location
Sonoma, CA
Website
www.myspace.com
I used a can of Rustoleum on my wheels. Flat black. It looks hellarad.


But like. Should I paint the hubcaps? Cause I dunno. It looks cool and contrast-y.



Sucks my tires are stock. :mad:

And need to be Armor-all'd.


Lemme know what you think.

IMG_6301.jpg


IMG_6302.jpg


IMG_6303.jpg
 
Did you do any particular preparation of the wheels first, use any primer, paint them on the vehicle, or off ??

Been working on my wheel caps the last few days; sanding, painting; etc;

I used the Dupli-Color Graphite High Performance Wheel Coating (WP102) for the wheel caps and the front bumper end caps which had lost 1/3 of their paint from road sandblasting. (just like yours and everyone else's).

The color is very close to the OEM bumper color, almost an exact match, but not quite; but as no one makes the bumper color in spray cans, I used what I could get.

Point is, been thinking of painting my wheels also, but using the Graphite as it is so close to the bumpers, as the wheels are not next to the bumper, your eye would not pick up the difference, I think.

G
 
looks good man. i did the same when i couldnt look at the aluminium anymore. although i did scuff them, primered, and sprayed about 4 coats of rustoleum hi pro enamel.
 
I dunno, a matter of personal taste. We use flat black on our prototypes to tone down the alloy wheels - less noticeable is the idea, but pretty blah.

I do like the graphite look, though. A little more distinctive. Maybe paint the just outer rim and the lug nuts the same color as the center cap to set it off a bit. But then, that's why I'm not in charge of paint color!

Dan.
 
Last edited:
The OEM wheels have a lighter grey inside the spokes; maybe paint them the graphite;
the LX450 wheels seem to have a darker shade inside the spokes.

Don;t want to hijack the original thread;

The dark wheels gives the green rig a sort of mad max look; now got to paint the wheelwells (or undercoat) to match.

Good work.

g
 
Looks nice.
All you have to do is paint the calipers red now.

Alvaro
 
I like it - if only it would last. I guess you can always do it again when needed.



Get a cap on that valve stem before it starts to leak - really.
 
I didn't take the wheels off before painting them, since darkness was already falling upon me when I started the task. I figured a little paint on the rotors wasn't going to hurt anything, for now. I'm looking at a front axle rebuild anyway.


About a week ago I used Armor-all's wheel cleaner to get all the gunk off, and today I sprayed all the brake dust off, and then used some metal sandpaper to rough it up a bit so the paint would stay on better.


I did about 3 coats, each after about an hour of drying.


I like the look of it a lot better, but I think I might end up spraying the lugnuts a silver color.


And I can't throw away the center caps. Cause they were a birthday present from Mudrak's daughter after mine got stolen. :mad:


Anyone else who's done this have an estimated time the paint lasts before having to respray?
 
English dude english!!! we dont all live in cali :D

Just kiddin; looks good. for me id paint the caps as well. My roomate painted his wheels over a year and half ago and they are holding up fine, think he did a light touch up last month, but they were not looking bad, just needed to match the fresh liner down the sides of his 80.


black on black = sexy.

except thats green :)
 
+1 for the black wheels.

-1 for the stocker tires.

black wheels + 33" (or larger) M/T tires ( + lift ) = +5.
 
+1 for the black wheels.

-1 for the stocker tires.

black wheels + 33" (or larger) M/T tires ( + lift ) = +5.


What about A/Ts? I do too much driving for M/Ts. I've driven almost 20k miles since I got the rig at the beginning of December. :frown:
 
I used the Duplicolor graphite(102), sanded , primed, 4-5 coats of paint and 4-5 coats of laquer and it looks good. I did the calipers w/ caliper paint while I was at it. I used a hair dryer to speed drying and even the alloys temp while applying which seemed to work well. Also did Krylon on the bumper ends to bring that back to life. Quick drying plastikote after light sanding, applying plastic adhesion promoter and plastic primer. Looks good.
new wheel by d.webp
new wheel 2.webp
side view.webp
 
Back
Top Bottom