i hate fuel injectors

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 5, 2006
Threads
60
Messages
126
Location
Atlanta, Ga
So I finally finished my hg job and went to start everything up tonight and hooray it starts then I look around and notice one problem. One of the fuel injectors is spewing fuel out from where it meets the fuel rail or at least thats where is looks like it is coming off. I was so happy with them at first because I had just gotten them back from rc engineering. I can't explain how mad I am at the moment. There is really no way to check that the seals are good between the injector and the rail besides looking at it i guess right? Well that was my vent now back to taking junk back off so I can fix it. awesome
 
I did this four times recently. You have to be very cautious and inspect the o-rings carefully. Use fuel to lube all of the o-rings and follow the FSM. As much as I thought I was taking my time, checking everything, and being cautious, it wasn't enough.
 
I did this four times recently. You have to be very cautious and inspect the o-rings carefully. Use fuel to lube all of the o-rings and follow the FSM. As much as I thought I was taking my time, checking everything, and being cautious, it wasn't enough.

Use a nice flash light and look at every one as you bring them in also when you start to tighten the bolts. Very easy to have 1 or to not seat proberlly and not real easy to see. Dont want to rush it.
 
Agree - easy to mess up when seating the O rings. I think I mention this and have a good technique on the DVD. Be advised if the O rings are smooshed when you open it up they'll never seal correctly so consider getting some new ones ASAP.

DougM
 
Back
Top Bottom