Hub recommendations

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 9, 2005
Threads
43
Messages
165
Location
Spicewood, Texas
Need to replace the hubs on my 76. Any recommendations, they need to be strong.

Thanks,
Jeff :beer: :beer: :beer:
 
Stock Toyota Lock outs.

You are talking about the Lock out, correct? The hub has the wheel bearings and rotor attached to it....


Install a pair of longfields at the same time...


Good luck!


-Steve
 
Yea, the lock outs. I'll install the Longfields as required. Install doesn't look too bad, I was just in there installing the Aussie!
 
Trail rig, NOT a daily driver. What are drive flanges?
 
jeffxlh said:
Trail rig, NOT a daily driver. What are drive flanges?

OEM solid plates that bolt on, and have the front wheels engaged at all times.

Much cheaper, stronger, and simpler than lockouts.

Most (if not all) FJ40's arrived on our shores with flanges, and were "upgraded" by the dealers to lockouts.

Bubba says "Check 'em out!"

Kirk
 
Thanks for the info bubba, but even though it is 100% trail rig I do have an Aussie up front. I think I'll need them open to get from the trailer to the trail haed. ........Or I may not???
 
Back
Top Bottom