Hose Identification - Coolant Spray

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 4, 2005
Threads
36
Messages
116
2 hours from home I got a substantial coolant leak going on. I am going to get it pressure tested tomorrow but identified a really poor condition hose that is mounted to the firewall on the passenger side of the the engine compartment.

I’ll try to get pictures.
 
This should give you the part number.
 

Attachments

Thanks! Here’s the pic.

upload_2018-12-29_17-40-9.webp
 
Can you take a few more pics? Is that just above the manifold?
 
It is pretty much lateral to manifold - attached to the firewall but looks to be in horrible shape and isn’t connected to anything. I’ll try to get a pic in the morning - it’s dark out here.
 
Yep, I think you are right. The moisture on the inside of the hose was throwing me off but it probably just caught some of the spray. Will look for the leak tomorrow. Thank you!
 
it looks like its the rear heat line, youll need to remove the t fitting on the passenger side and the longer brass tube on the driver side with hose I circled both in the parts diagram. 5/8 heater hose is the correct size that you will need, most people prefer gates green stripe but if they don't have that the gates white stripe is good as well.

Screenshot (19)_LI.webp
 
Thanks the P.O. Bypassed the rear heat and vapored the t-fitting with was rubber cap. This seal broke and was the cause of the leak dripping coolant into the exhaust, making the experience all the more dramatic with smoke. Thank you all! #lovemud
 
Back
Top Bottom