HELP!!!!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 27, 2005
Threads
51
Messages
214
Location
Granger, IN
i'm trying to buy this 93 fzj80. It is a 7 hour drive from here but if it is what I want I will go get it. the dealer claims it has lockers and had it posted on auto trader as well along with pictures of the locker switch. I asked him for a VIN sticker pic to make sure of the magic number and he sent me this ( not too good of a pic)
View attachment 122514
I can kinda make out some of the words but not too familiar with where to look?

Does this LC have lockers????
 
Last edited:
i cant tell buy that but ask for the vin#and drop cdan a buzz or you can just ask him if there is a selecter switch on the dash for the lockers.

Ahh.... I'm kinda new but have heard much about the fabled CDAN. Is that his username or is there more to it?
 
Ahh.... I'm kinda new but have heard much about the fabled CDAN. Is that his username or is there more to it?

Dan Busey, American Toyota Albuquerque, NM 1.800.432.6668

See Vender page also.

Screen name: CruiserDan
 
Ahh.... I'm kinda new but have heard much about the fabled CDAN. Is that his username or is there more to it?
ya thats his user name he is a busy man i warn you.i dont remember if carfax goes back that far or not.go to support our venders find american toyota and give him a buzz his name is dan in parts department.or if he is to busy ask someone else in the parts department.make sure you tell them you are from ih8mud.com
 
Look at the second to last line RIGHT below the barcode. There is a code, K294, about dead center on that line.

K292 = non-locked
K294 = locked

This is NOT an absolute as others have seen K294 on the tag on a vehicle with out lockers but that appears to happen if the axles have been swapped, and vice versa. By all indications with the magic dial and the K294 the 80 has lockers. The TRUE test is to have the dealer take pics of the axles themselves showing the locking mechanism. Also, you could ask them to verify the lockers actually engage before driving 7 hours (or find someone local to check it out for you)

HTH
 
thanks everbody. You have much better eyes than i do!:eek:

Nah, just when you spend 6+ months looking for and at locked 80's you get good at it :D

I always just start with looking for the magic dial. If it is there then check the tag for the "K294". If that is there then probably 99% of the time you are good to go but for further verification you check the axles and then of course check to see if the things actually work (blinking = enganging or trying to, solid = engaged - oh, and the ABS light comes on) ;p

As for the rig you're looking at, it looks like K294 on that tag to me but just ask the dealer to be sure. "4" and "2" are close enough that on a fuzzy picture it could be either.
 
That is all well and good. I would ask for a pic of the "magic" switch on the left side of the dash. If it is there, I would go and make sure. Jack up one wheel on each axle and lock it up. It should drive away off of the jacks in high range if it is locked.
According to C-Dan, they only imported 20-30,000 locked 80's. Everyone would like to say that they have one when selling an 80. I would make sure before paying the premium.
 
Don't drive it off the jackstands :eek:

Just lock em... you'll know if they lock on pavement....
 
I'm about 7 hours from Boise, South. Where is this fabled cruiser? I'd be happy to take a look at it for you if it's anywhere near here. I'm going South to SLC tomorrow, so pretty much anywhere along the Wasatch front I could stop off for you. Let me know.
 
Back
Top Bottom