Help with identifying a part

[tj714]

The pic below is the passenger side of a 2007 VVTI engine.

The hose below is cracked and needs to be replaced. Can anyone identify what this hose is called?

I appreciate the help. Not very mechanically inclined, but replacing this is within my skills.

 

[jerryb]

ventilation hoses. VENTILATION HOSE. For 2006 Toyota Land Cruiser Base 4.7L 4WD AT | Toyota

edit, this one, specifically. 2007 Toyota Land Cruiser Base 4.7L 4WD AT Hose, ventilation, no. 2 - 1226250080 - Genuine Toyota Part

 

[tjb]

I'm onto the same hose (orange arrow), but wonder if someone can help me identify the one pointed to with the yellow arrow in my 2006 LX470?

 

[jerryb]

3.5mm, or 4mm hose, any hose will do. the positive or passenger side of the pcv is 14mm, 15 works also

 

[tjb]

3.5mm, or 4mm hose, any hose will do. the positive or passenger side of the pcv is 14mm, 15 works also

Looks to me like the little hose is 90999-92002. Used all over the vehicle. Still can't find a diagram with it. Length is about 4", I think. Had no clamps.

My 1226250080 didn't have a clamp on the top, but the parts places suggest it should.

Weirdest thing. Both of the bolts that hold the air intake pipe to the valve cover were sheared/broken.

The air intake connector is held by the pipe connections and gravity. I suspect the resulting vibrations could have stressed those old hoses. Those bolts are another part that's hard to identify. They probably come with a new air intake connector.

How would they get sheared in the first place? They're only holding down a plastic part.

 

[kruisinkid]

Amazon product ASIN B01AUSRXS8
those bolts are definitely sold each on their own. check diagrams at partsouq.com

 

[tjb]

check diagrams at partsouq.com

Thanks - always forget about the great diagrams there. They didn't have the bolt, but the part number for the bolts that connect the air intake to the valve cover is 90119-06330.