Help with floor switches

[Scott R]

I am starting to remove the last few pieces before I paint the tub on my 40 and I need to identify two parts, on the drivers floor are two foot switches. One is obvisously for the hi-beams, but what would the other do? Its a few inchces to the right of the switch I assume is the hi-beams, identicle in shape and size.

 

[Landpimp]

what year? but on a floor mounted dimmer 40 there is only one thing on the floor.

maybe the PO added one, I did on my fj80, I can turn on/off my driving light with it.

you can just see it in this pic
http://pic10.picturetrail.com/VOL326/691553/1165044/13536178.jpg

 

[Scott R]

It's a 73'ish tub according to the ID plate. I thought it was maybe an add-on as well, however it's tied into the lighting harness so weel that I thought it was maybe factory. Guess I will have to track it down!

 

[Outback]

Hey pimp, did that rubber mat come with any backing? I need something like that. My foot gets hot down there and I'd like a floormat.

Jody.

 

[Scott R]

Did not see that link before, DOH! The switch in the picture I have, and then about 5 inches to the left is an identicle switch.

 

[Landpimp]

from SOR, no backing(and I didn't want any) in the summer I used some Quaitly Heat Shield, take it out in the winter, droped the floor temp 40deg+

Hey pimp, did that rubber mat come with any backing? I need something like that. My foot gets hot down there and I'd like a floormat.

Jody.

 

[Landpimp]

that pic if kinda dis-eving(sp) it looks like its under the clutch pedal but its more under brake pedal, its the stock dimmer. If ya got 2 of them.....one of them has been added.

Did not see that link before, DOH! The switch in the picture I have, and then about 5 inches to the left is an identicle switch.