help with a b&m shifter

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 8, 2005
Threads
23
Messages
78
Location
Victoria, Australia
Hi guys. I've posted this on the Toyota Truck forum but no luck, so I'm hoping someone here can help me. I have a 86 Hilux (as well as a 78 FJ40) and 'm sticking in a b&m shifter to replace the shifter on the th350 that is there as it's looking a bit tired and scruffy. The problem I'm having is on the hilux the transfer shifter is below auto shifter , not to the side. The console housing supplied with the B&M covers both shifters. How can I modify the transfer shifter so that it is not in the area covered by the b&m and is still usable? ANy help would be greatly appreciated. Cheers
 
Why not just leave the console off? I know you will not have the shift indicators if you do that but the console serves no other purpose but to cover up the shifter mechanicals. It looks like you already have that covered with the boots.
 
Back
Top Bottom