Help!?! Tub pics

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 6, 2005
Threads
33
Messages
128
Can someone please send me a couple pictures their rear sill on a 75-78 fj40 I am replacing mine and have no reference as to what it is supposed to look like. I purchased a new rear sill and am wondering if the sill is welded all the way across on the floor or if it is spot welded then sealed with the 3m sealer. Also if it is overlapped on the bed or if its cut even with it.

thanks,
rsnellie@hotmail.com
 
rear sill

dont know wether this will work for yah, I'n finding some closer ones.
Paul.
IMG_1257.webp
 
Here's a couple of shots of mine. I'm not sure what year the back of the tub is, the previous owner put it together with a couple of different cruisers and didn't give me any specific details. It is set up with the catch for the ambulance doors. If you need more pics let me know. Just a side note most of the visible rust is loose flakes that have fallen from the hard top, it (the hard top) sat under a tree for several years.
40 series rd 101.webp
40 series rd 102.webp
 
Check my thread on the Panama tub review. I'm pretty sure I had a pic of the sill from the inside. Going to my shop this moring, I'll try to remember to take and post some pics from all sides.
 
Here's some pics of how they do it in Panama :D
 
Last edited:
More, let me know if you need anything more specific.
 
Last edited:
What seam do you mean? I'm still in my shop, I can take more detailed pictures.
 
On your first pic. Where the sill meats up with the bed it looks like it is welded strait across "wheel well to wheel well" then ground down to make the bed look like one piece of sheet metal all the way back. Is that correct?

btw thanks for all the help
 
You mean where the bed joins the actual sill (the sill being what loumass pictured)? Pretty sure that is welded all the way across. You can see the seam form underneath with spot welds (especially in my last picture). On the upped side, I don't recall seeing a seam. I'm out of my shop now, but I'll check on that and take some close-ups of the top where the bed joins the sill.
 
Figured it out, you may want to contact Paul (loumass) since he's the builder:

The sill has a "cap" on it. The inside of the sill is the structural part pictured in loumass' post above. Wrapped around that is a single piece from the top, around the back and under the bottom (parallel to the bed, perpendicular and then parallel to the road). The bed part is welded underneath this.

Check my drawing: the labels are color coded (ie. "sill" written in red means the red lines are the "sill")
 
Last edited:
One more.

Kinda complex. The shaping of the "cap" piece really makes me appreciate Paul's work more and more! Freakin' sweet!
 
Last edited:
Updated drawing: the "cap" doesn't cover the whole undersurface. The sill and the "Cap" have a step off in the top back (can see in the pics, also can see it on loumass' picture: I think the sill in his pic is upside down so the step is down) The step part is only in the bed area, not under the wheel wells.
 
Last edited:
Once again, props to Paul Pilgrim ("lomusass" on here). He makes the "Panama" replacement tubs, and I am still astounded at the level of detail!

:beer:
:grinpimp:
:eek:
:beer:
 
Back
Top Bottom