HELP, Is this the steering box leaking?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 12, 2007
Threads
12
Messages
47
Location
Toronto, ON Canada
Hi all,

Once again it appears as if I need more help with my truck. What would I do without this site? I have developped a small leak in the left front fender area. The funny thing is that there is nothing around leaking:confused:. No fuel (diesel), brakes lines are ok, and the engine is too far away. This leak drips onto the frame and creates a quarter size spot every few days on the drive. I do not have power steering and was wondering if there was fluid in the steering box (seems to be the only thing I can think of that is leaking), and what kind is it and how do I check the quantity. The cap on the top (round one with the nut underneath) just spins without coming off or tightening up. I wiped the area completely clean a few days ago and this is what it looks like today!

Any help is appreciated. Thank you
IMG_0247 (2).webp
IMG_0249 (2).webp
 
Thanks Grant5127. Where is this "SECTRSHAFT seal" and how do I replace it? Is it a part from Toyota?
 
On the output shaft... just poke a hole in it with a ice pic and screw a small sheet metal screw into the hole and pull on the screw with a pair of pliers.... install the new seal with a small punch tapping it in in a circular rotation until seated.........
coolfj40_1957_3603867.webp
 
Yeah mine leaks too; I've just been refilling it frequently (The owners manual for my '78 says to use 90 wt gear oil.), but will try the fix mentioned here. The cap should unscrew. I needed a big breaker bar and a long extention to give it enough persuasion the first time I removed it, but with some anti-seize lube it comes off easy now. If yours just spins w/o loosening or tightening I suspect it's stripped--bummer. Good luck.

Tad
 
Great info. Thanks Grant5127. Is that screw on the side or towards the top and where would I find a replacement?
 
when mine leked i filled the boxes with grease and have been happey for many years although this may not be the mud way it works for me good luck
 
Like Shelf said....pump it with grease...I did, still good after 15 yrs.
 
hi All:

X3 - that is what I did back when I still had "Armstrong" steering on my FJ40! :D

Regards,

Alan

------------------------------------------------------------------------
Like Shelf said....pump it with grease...I did, still good after 15 yrs.
 
The grease sounds like an ok fix for me guys!! I pumped some synthetic grease into the box. Should I pack it tight with grease? I also added a little "Lucas power-steering stop leak" in there too. Thanks for all of the responses!!
 
Am I starting to get a reputation for digging up old threads? :cool: My seals have gone bad recently in my 75 manual steering box. I like to make my repairs properly, so I'll get to the whole steering apparatus this winter as it looks like a pretty big job to me (paint the shaft, etc). IN THE MEAN TIME, I am considering the grease fill mentioned by others above. I'm hoping that the grease will keep me wheeling until snow flies and repair season starts. Will grease cause me further issues down the road? It seems like a better lube than oil for this application anyway but I'm no engineer. Thanks!
 
Back
Top Bottom