Help Identifying rear axle
- Thread starter JPA
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
You could try early 70 series, they used a single cylinder and there may be some crossover, hzj77 or similar. I have a 91 pzj77 and its brakes are a parts bin nightmare
Maybe there is a free manual here - Land Cruiser Factory Service Manuals (FSMs) - https://www.cruisercult.com/factory-service-manuals
Taking it apart and measuring stuff carefully might let you find parts that will fit from other applications.
Plus 1 for looking at other application at places like SOR.com
www.sor.com
Full Floating is always nice.
Taking it apart and measuring stuff carefully might let you find parts that will fit from other applications.
Plus 1 for looking at other application at places like SOR.com
FJ40, FJ45, FJ55, FJ60, FJ80 and FZJ80 Front and Rear Brake Shoes, Wheel Cylinders and Hardware, 1958-1998 Land Cruiser - Specter Off-Road
Toyota Land Cruiser parts since 1983. From the oldest FJ25 and to the newest Land Cruiser, Non USA or domestic 40 Series, 60 Series 80 Series or 100 Series, SOR has the largest selection of top quality new and used OEM and aftermarket Land Cruiser parts in stock in the world. Specializing in...
Full Floating is always nice.
Good chance it the same as the 60 series. During the 1980s Toyota and pretty much standardized brake parts in the Land Cruisers. Only difference is most long wheel base 40 series didn't have a hand brake. Those the parts for the hand could be added. All had the single wheel cylinder. I show the front drum brake axle after 8/80 still using dual wheel cylinder but only single on the rear.
What year is the BJ43?
What year is the BJ43?