Help Identify Tie Rod Ends

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 29, 2002
Threads
312
Messages
2,181
Location
Walnut Creek, CA
THe previous owner had done the disc brake conversion and the original power steering converision on my FJ40. I had Mudrak redo the box mounting, shackle reversal and steering shaft and now it at least steers straight.
My tie rod is bent and I was going to replace it and put new tie rod ends on at teh same time. Problem is I can't figure out what ends are on the tie rod. See pictures. The conversion is for a Saginaw power steering.
Any Ideas?
Steering Dr side to post.webp
Steering Pass Side to post.webp
 
petescoffee said:
Thanks Pat. I have been trying to match the ends up to LAnd Cruiser parts. Didn't even think about the Mini truck parts.
Thanks,
Dave
I had the same problem trying to match up those look like mini to me as well.
 
The rod is not the same length....... but it will work. The mini rod is shorter, but the rod end with the hole in it is longer, bringing them back to the same length.
Also, the hole on the mini rod end is closer to center than the LC end, necesitating shortening the relay rod (yours will have been shortened allready).
I hope that makes sense....
PMK
 
Back
Top Bottom