Help ID this parts

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 4, 2005
Threads
38
Messages
81
Ive always wanted to change my steering. first choice is to put back if not to original form but atleast to original look.
if this is not from a 40 series, can i install this to my 40. its obvious that 40 series center arm 's different from this on the picture, even the rod that isn't adjustable
help me pls identify this parts and let me know if its possible to install on my 40 if its possible... how do i install properly
i dont have chances on comitting mistakes
thanks
any words from you guys is a much help for me
regards
IMG_1355.jpg

the gear box is from a RHD mini truck different pedestal will be fabricated
 
Have you noticed how many people have viewed your posts with out replying. It's likely due to the dangers of mixing and matching steering parts.

Please if not for your own safety, then for those in and around your vehicle, please either refurbish with factory equivalents or purchase a complete steering kit from a reputable vendor and find an accomplished mechanic to install it.

Just my .02: Don't mean to offend. To attempt utilizing the "mystery" parts that have been posted would require direct hands on measurements and inspection. Recommend finding someone in your area more familiar with this sort of work to at minimum make recommendations.
 
Have you noticed how many people have viewed your posts with out replying. It's likely due to the dangers of mixing and matching steering parts.

Please if not for your own safety, then for those in and around your vehicle, please either refurbish with factory equivalents or purchase a complete steering kit from a reputable vendor and find an accomplished mechanic to install it.

Just my .02: Don't mean to offend. To attempt utilizing the "mystery" parts that have been posted would require direct hands on measurements and inspection. Recommend finding someone in your area more familiar with this sort of work to at minimum make recommendations.


Have you read the title. it says "HELP" ID THIS PARTS
im asking for others HELP for me to id the parts, did i say i was going to install it NO, rather... im asking only for others opinion if its ok or not to install. Its very simple... Iether yes or no
my only mistake is that the pics came out to be small
 
I looked at the picture through a magnifier. Only thing that is clear is the box. You say that it came from a rhd mini. The mount on the case looks more like a 40 mount than a mini. Afaik the mini mount is parrallel to the case, The 40 mount points down like the one pictured. If that is the box you want to use, then you better be in NZ, Australia, or England. Sure won't work in a left hand drive
 
Last edited:
Ok,
Perhaps I was a bit out of line.
Suggest: Measuring the parts you are keeping and those you propose to use as replacements. If they are exact fits then, beauty! use them. If not, decide whether they have enough redeeming qualities to warrant adapting to your application. Stay safe and best of luck.
 
Back
Top Bottom