help - electrical ground?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 28, 2004
Threads
157
Messages
2,023
Location
Norwich, VT
'94 1fze 80 series with 161K miles

I've been slowely trouble shooting a shuddering tranny and have been making some progress....I thought.....a couple of days ago the CEL came on. I've checked all vitals - still running fine - I havn't retrieved the codes yet (hectic schedule right now at work) - anyhow on the way in this morning the CEL went out along with: oil pressure, temp, tach, speedo, d,r,2,l, etc. fuel guage still operable, dash panel is still lit....I'm thinking ground for a cluster of these funtions....anyone? anyone, bueller?.......
 
Stayalert;

Ah ha, a juicy troubleshooting problem. Here's a help chart I put together that might aid u:

http://homepage.mac.com/dfmorse/FuseChart3.5.1/

Print this out and place it with EWD 189U; which u will need.

I am assuming that u are talking about the indicators in the "COMBINATION METER" (EWD189U, page 144) that have stopped functioning.

First, check ur brake lites. Do they work? The "STOP" fuse (#4 in my chart) can cause strange problems if blown or shorted. This is true for the "TAIL" fuse, #2, as well. Check to see that ur tail lites (and running lites) are working properly. These fuses supply juice to more than they imply.

One of the problems with the 80's wiring system is this: if a tail lite bulb blows, it may short out [not an open circuit], or be intermittent, causing erratic problems all over the electrics. The fuses (#2, #4) may still be good, but the bulbs in the tail lites may be malfunctioning, or intermittent. The filiment opens, but bounces off of ground.

A possible common ground for some of the instruments u have mentioned is "ID", EWD189U, page 28; located left kick panel.

Good luck
...
 
Last edited:
Many thanks DFM!!! I fixed the problem...It took me a while but your post proved helpful:beer:
 
Back
Top Bottom