Help!!! Brake line flares

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

nat

Joined
Sep 20, 2005
Threads
169
Messages
1,990
Location
Los Gatos, California
So I need to reform a piece of brake line, so I took the piece down to the auto store to get a straight length that I could bend to what shape I want. All they had was line with bubble flares on it. The guy said that the mating piece forms the rest of the flare when it gets screwed together. Is this correct? I am worried about screwing up the calipers (my mating piece)

Any other flare info is appreciated :cheers:
 
First thing you need to find out is if they sold you brakeline with the proper flare fitting. Unless the little sticker says Japan/Europe on it I bet it has domestic fittings and won't work. The domestic fitting will not thread thread into your caliper so if he sold you the correct line you will know right away. So, no way you can screw up the caliper.
 
So I need to reform a piece of brake line, so I took the piece down to the auto store to get a straight length that I could bend to what shape I want. All they had was line with bubble flares on it. The guy said that the mating piece forms the rest of the flare when it gets screwed together. Is this correct? I am worried about screwing up the calipers (my mating piece)

Any other flare info is appreciated :cheers:




It is not correct....that is not the correct 'inverted flare' brake line that you will need....bubble flare and inverted flare are not compatible.




Ask them to show you 3/16" standard brake line with ends on it, and then look at the flare...that is what you are looking for....you then want a piece that has that style flare, with a 10mmx1.0 male inverted flare fittings on it.


:beer:
 
Yep, I feel your pain. I dont know about that parts guy. If your location is anything like mine, the flared line with the metric ends are hard to find for some reason. All the wal-mart type parts stores looked at me with a blank look on there face. I ended up gettin mine from crow burlingame. Thats my .02 worth. Oh yeah, I think flaring your own tubing is the better choice.
 
In San Jose, I was able to get metric brake lines from NAPA parts stores, they usually have a some laying around without the need for special ordering. But I still need to bend and shorten the lines. I also bought a nice Ridgit double flare tool kit just to double flare the line after cutting it. There's should be a NAPA store near or at Santa Cruz

Btw, if you need stock brake lines, you might be able to get it from Toyota.
 
The local auto store around here has a rack with 3/16 on it too. I just cut the ends off and reflared as well with the old fittings. Save all the old fittings from the old lines and reuse the ones that aren't to badly bunged up.

I have a nice Rigid double flare tool. I think it stinks. I thought I'd save a few bucks over the Imperial tool. Turns out it cost me two tools. (Sorry Mustard)

Imperial Eastman is the ONLY way to go. Runs like $70, but works like a charm everytime without all the super muscling. It is way worth it.

The last guy I talked with at this place was a major ass. I don't really like dealing with them because of it, but I haven't found a better source for random brake tubing, parts and tools. They might be able to source stuff if the local shops can't help.

www.inlinetube.com

good luck.

Andy
 
Thanks for the replies :cheers: I thought the guy was full of crap when he said screwing in the fitting would finish the flare. I need a flaring tool...........but I will try the mom and pops type place, it is just out of the way to get to.
 
I got my flaring tool for like $18 at Pep Boys. It's not all whiz-bang and everything, but it works every time (once I learned how to use it right). It just takes some practice and patience.
 
Back
Top Bottom