HELP! - '94 transmission shudder

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 28, 2004
Threads
157
Messages
2,023
Location
Norwich, VT
tried search last night but it got late.....

I have a '94 with 161k miles. in neutral/park she idles and revs smooth as silk....Once I start to drive she'll start off but then shudders and tries to die as engine rpms go south....its not a brakes dragging or 4 flat tires feeling...its something shuddering and hunting in the transmission.....once the rpms get up alittle it seems to drive normally at highway spepds.....coasting and braking to a stop at a red light for exampl...brings back the shudderama

In a fit of desperation I driopped it at the dealer at 7:00AM....they just called and said we can't even look at it until next week......

Hopefully this will be my saving grace as I will have an opportunity to get it home and hopefully with mud assistance....get her back to normal, without ddealer intervention........Please help!!!!!

Rob M
 
currently thinking throttle cable adjustment....nice FAQ on that.....fingers crossed...
 
Check your throtal postion sensor outputs and your speed sensor as well...

Worth a check... I would also look closely at your connections to and from your trans... could be a short... Good luck! You may also wish to call Rodney from Whole sale auto trans... Its a expensive call to Australia but he has the experiance to help you trouble shoot it.

Kevin
 
Carefully.... CAREFULLY check your wiring harness as it goes by the rear of the engine past the EGR pipe. Sometimes hidden damage due to wires melting, can be hidden and under load they will short out.
 
you say it does this under braking?

have you recently done anything to the front axle such as the birf service?

nope braking or coasting....no birf or suspect axle/brake involvement
 
fortunately (I think) I rescued the truck from the dealer before they got their mits on it.....

A couple of signs do indeed point to the harness as a culprit - fault codes courtesy of jumper wire "SST"....

63 - severed #2 solenoid or short circuit - severed wire harness or short circuit

64 - severed lock-up solenoid or short circuit - severed wire harness or short circuit

So? :confused: Where the heck are these two devices???? I see the FSM diagram but still not sure - would like to view wire code at these devices and then carefully uncover/wrap harness in vicinity of EGR pipe...seems a bit busy back there but I came up with a great work platform - I'll post photo. tomorrow...

PLEASE HELP!!!
 
Last edited:
no idea lol

funny for you perhaps:flipoff2: I'm trying to figure out what color the wires that serve these two solonoids are so I can tracce/inspect them.
 
Hope this helps. Can you read these OK? Trace all the way through, but my bet would be exterior to the body, underneath where damage may have happened. Connector "EC2" I think is Driver Side between engine and trans, probably difficult to get to. Read: Dealer will charge you sick money to solve this one for real!

Get yer hands dirty. Good luck dude.

Dan.
 
Last edited:
I just took my 94 TLC to a toyota master mechanic that opened up his own shop after working for toyota some umteen years and my issue is the same but its worse the first hour or so of driving and after it gets well driven during the day the shuddering subsides when the RPMs go high, if i excel slowly like a 90yr old it won't shudder, but if i step on it lilke i am late to an appt then the shuddering begins, but not to the point where it feels like its going to stop.
He said this can be my spark plugs or cables especially if they are still the stock cables and plugs. Anyone heard of this issue?
 
Hope this helps. Can you read these OK? Trace all the way through, but my bet would be exterior to the body, underneath where damage may have happened. Connector "EC2" I think is Driver Side between engine and trans, probably difficult to get to. Read: Dealer will charge you sick money to solve this one for real!

Get yer hands dirty. Good luck dude.

Dan.

Many thanks Dan! About 30 minutes ago I enlisted my wife's help (she's the computer savy one in our house....We downloaded (Thanks natorgator!) a bunch of documents...the two you posted above are 2 of the three I printed out...I feel like I'm on the right track but still haven';t had a glimpse of the light at the end of the tunnel. many thanks for posting those diagrams they came through just fine! the thought of putting this in a dealers hands makes me shudder worse than the tranny...
 
I just took my 94 TLC to a toyota master mechanic that opened up his own shop after working for toyota some umteen years and my issue is the same but its worse the first hour or so of driving and after it gets well driven during the day the shuddering subsides when the RPMs go high, if i excel slowly like a 90yr old it won't shudder, but if i step on it lilke i am late to an appt then the shuddering begins, but not to the point where it feels like its going to stop.
He said this can be my spark plugs or cables especially if they are still the stock cables and plugs. Anyone heard of this issue?

hi herculz. interesting....I can't seem to avoid the shudder unless I'm on flat ground and drive as you say like I'm trying to beat a prius in a fuel efficiency race....I've replaced my plugs/wires/dizzy cap with genuine CDAN supplied factory parts a few monthes ago....We've had some good heavy rains here lately and I was scratching my chin on "weather" impacts as well....My fault codes are telling me two specific tranny related components that I'm currently focusing on.....Thanks for the thoughts...Where is this master gone solo dude located???
 
Somebody reported something like this once a long time ago and I think it was a wire bundle or connecter near the front driveshaft that was improperly secured and dragging on the driveshaft. I don't recall what the end of it was.

Get a good bright light and lay under there studying things for starters. I'm *assuming* your tranny and center differential are both properly full of fluid and that your rubber intake tube nor water in your AFM connector on the intake tube are the culprits.

DougM
 
Update:

gingerly attacked the large bundle near EGR pipe. Carefully massaged through the wires, didn't see anything suspect.....Part of my challenge is I can only go so far and then I have to button it all back up again so as to get to work the next morning. Am definately eyeing the bicycle over in the corner......SO??? I started off to work this morning and the truck drove nearly flawlessly. A couple of little hesitation on approaching a stop but VAST improvement. Last night as I grew weary and threw in the towel for the night I was getting REALLY frustrated/angry....After this mornings improvement I have renewed hope of recovery......

A side benifit is that I noticed about 5 short pieces of heater hose that are grumbling for replacement as evident by the pink crusties at the ends where they meet pipe....:D

keep the thoughts and ideas coming!!
 
Somebody reported something like this once a long time ago and I think it was a wire bundle or connecter near the front driveshaft that was improperly secured and dragging on the driveshaft. I don't recall what the end of it was.

Get a good bright light and lay under there studying things for starters. I'm *assuming* your tranny and center differential are both properly full of fluid and that your rubber intake tube nor water in your AFM connector on the intake tube are the culprits.

DougM

This could have been me, but this one was the EFI fuse and the car would stop dead in it's tracks. The harness came out of it's attachment point on the frame on the pass side near the front driveshaft and then rub through the sheath through to the O2 sensor power wire which was fused off of the EFI circuit.

I do think 'stayalert's' problem is under there somewhere, likely on the drivers side as the harness goes from EC2 to the trans connectors. 2nd place I'd look, a little harder, the harness from IH3 to EC2, probably running past the EGR pipe. I think by moving the wires around, you've maybe removed the point where the wires were grounding or shorting out and that's why a temporary improvement --- KEEP LOOKING!

Dan.
 
.............I think by moving the wires around, you've maybe removed the point where the wires were grounding or shorting out and that's why a temporary improvement --- KEEP LOOKING!

Dan.[/QUOTE]

'zactly what I'm thiking and doing.
 
I'm back, and glad to hear you have some what of an improvement, as for my shuddering, it went away as soon as my wires and plugs were replaced. I do recall my shuddering beginning wheni started moving wires along the firewall under the hood, it was freaken annoying especially since i bought it then drove it 250 miles home flawlessy. So i flushed the radiator, looked in the air filter, tried to secure a bundle of wire along the firewall and bled the brakes. Soon after that the shuddering began. Hope you find your solution soon. :beer:
 
Back
Top Bottom