Hello! -(Post #1)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 4, 2016
Threads
4
Messages
10
Location
Madison, WI
Hello IH8MUD...


This is my first post and I would like to introduce myself. I am from Madison, WI. I am looking for advise on the purchase of an FJ80 or maybe a 62. I do not own one but there is a date somewhere in the future that I will have something in my garage. I have always loved the styling and purpose built quality of FJ80's and classic looks of the FJ60/62. I am hopeful I will be ready to buy in 2 years.

I hope to find 95-97 FJ80 or a late model manual FJ62 with as low mileage and good history as possible without going insane on the price (like ICON obviously). I have had hand-me-down vehicles since I was 18 and I am now 38. I have never been one to buy on credit and prefer to only get something without extending myself. So never have had the chance to buy a vehicle I wanted. But, working "in the trenches" for years now I have finally paid my dues and have begun to make a descent salary. That said, I am not a "check writer" by any means but I won't mind paying for a quality FJ. This is something I plan to keep for a long time and possibly hand it down to one of my kids.

So I know a little about the 80 like the head gasket and the hard to reach heater hose and the 62 finicky automatic trans... But the one thing I really do know is that I needed to come to IH8MUD and begin dialog with individuals who know a lot more than me. So I thank in advance everyone who can help me make the right choice when I have finally saved enough put an FJ in my garage.
 
Welcome :flipoff2:.

I am from Madison and got my 80 there too. Its well rusted. Had a Fj62 from WI and it was more rusty. The last owner didn't change the oil either.
But she sure did run good. Drove it all over the west after leaving WI.
62 Spinners 3.webp
3FE Valves.webp


Having owned a FJ60, FJ62 and FZJ80 the nicest is the FZJ80. The FJ60 is the easiest to work on. Fj62 has EFI so no carb to learn how to repair. For pleasure to drive the FZJ80 wins again but for real long term use a FJ62 might be the way to go as I am not liking all the plastic electrical parts breaking as the 80 ages.
 
Last edited:
What plastics are you seeing breaking? Is it because of over use or is the plastic breaking-down in some way? (sun exposure, maybe)
 
All over. Under hood, the fuel injector plug connector clip. Under dash, the connector plug to the speedo cluster, been in there before years back and all just popped right out, this time I had to use small screw driver to get one apart. Some clips on the speedo snapped right off this time. Taking panels off this time, some of the trim brakes as its brittle.

I think its from living in Colorado last 11 years. Its in garage about 60% of the time but does spend months at a time sitting in the sun.

What are your plans for the LC. Daily driver, weekend fun, lots of four wheeling (not may places in southern WI to go wheeling that I know of).
If you want a LC that you will keep, maintain yourself and rebuild as needed for the rest of your life (at least plan in it) a 60 or 62 might be better as there will be less electrical problems to deal with many years down the road.
But with the many 80's out there I am sure there will be work-arounds to what ever problem, electrical or degrading plastic, comes up.

I upgraded to the 80 from the 60 as I wanted EFI, lockers, more comfortable seats, better steering, handling, larger wheels etc and for the last 230,000 mi (80 has 438,000 mi) it has been mostly problem free. Not sure if 60 or 62 can rack up that kind of mileage? But now with rust, worn motor, worn drive lines, it will cost way more to rebuild the 80 vs buying a lower mileage one. I dont know the costs to rebuild a 3FE?

All three, the 80, 62 and 60 have plenty of pros and cons. I would assume you can get a 62 a lot cheaper than a 80. I got my rusty 62 years back for $1000 and traded it in later for $1000.
 
Kurt,
That is strange about the plastic. I would think most of those items you mentioned were not in direct sun... But I guess some types of plastic do get brittle in certain conditions. Have you found any similar problems in the 60's?
I am planning on a daily driver. I like your idea of the simplicity of the 60. But what is your impression of driving a 60 (never driven a 60). I am sure it is not as nice as the 80 (have driven). Is it a road tractor? Or to ruff for a daily driver?
 
The 60 was bought in CO but was from East Coast. I bought it and took it to WI where I later sold it.
60 has 4 speed trans. Mine was very slow till I got the sticky rings freed up. I also added a HEI dist. The HEI dist made a BIG difference in performance. I didn't have to use the choke to start any more and could take off in 2nd gear. Couldn't do that before the HEI dist. I enjoyed the manual trans but after having an automatic I am not sure if I would go back to a manual. I had the springs re-arched and they were aftermarket so I have no idea what lift I had. Was going to do a spring over lift but with the re-arching was too much for me. I ran 31x9.50x15 tires and I think I needed to adjust the front axle angle as it was just a little bit squirrely but not too bad.

Seats are nicer in the 80 but there was something I liked about the 60/62 seats too. For a daily driver I would pick the 80. I drive 96 mi round trip a day to work and use to drive 150 round trip to work a day. I would not do that in a 60 or 62. The 60 is like driving a brick, the 80 is a luxury vehicle.
 
Welcome to mud.

Sounds like you got plenty of time to read read read as well as to sit in some and try to arrange driving one of each. Patience pays off in a search for an LC. I'd say try and drive one if not a few of each. That may answer your questions right there.

Buy the cleanest one with best maint history you can find/afford and after determining your wants I would highly suggest looking outside of wi and the ne us for that fact.

All 62's were 3fe with automatics in stock form. H42 4spd bolts up but would have been a user end swap.

A lot of your questions might be subjective to the owner/operator. But I think you nailed the 60 series as road tractors.

As to Kurts question on 3fe rebuild cost it is high like the other toy motors but more importantly parts are becoming unavailable quickly. Of course we are seeing this with the 80 series now too
 
Back
Top Bottom