Hello From Europe

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

there is some discussions of exped mods for 80s in the expedition corner, and a thread where some Aussies make the point that they don't want high lifts for exped work.

Note also that it's widely held here that as you go above 2.5" maybe 3" of lift you may start getting into more issues with the front end (caster, vibrations, need for longer shocks, bumpstops etc). So less is better probably if you don't do hardcore rockcrawling.

Personally, I think 2.5" with 33" is a very nice combination for expedition.
 
Cañonero said:
Yes, the diesel hasn't got a big amount of horse power, but the torque is huge, and you got lots of it from a very low rpm.
:flipoff2: (YES, I also have diesel envy)

Torque is where it's at.

V8's are in the 100 series.

Welcome to the site!
 
David,

Bienvenido al foro.

Keep the pictures coming.

Saludos

Alvaro

Venezolano/Gallego
 
David: on the freeways that I take in Spain, they have a little bucket hanging off the side of the booth to pay with change, IIRC. With some practice, you could just open the LHS front window and throw the change in from the driver's position across the truck, no? Or even more challenging, over the roof :)
 
Hola Alvaro.

Yo soy asturiano así que somos medio vecinos. Un saludo.

e9999, the most challenging would be, to amortize the front bumper, to break the barrier they use in the toll and run away. :)

I'll try to post some more pictures as soon as I have time to make them.

I've found another suspension kit made by Ironman. It is an australian make as well and the shocks look bigger and tougher that the OME. What is your opinion about this shocks?

The only problem is that the ironman kit is only available with 2" lift and I'd like to get to 2.5".

Do you have any references about this suspension? Should I fit the 2" heavy duty springs to get more heigth or that's not a good idea? I'm going to carry weight in long expeditions, but in most of my routes, I won't carry much.
 
Hola, my Hdj81 (RHD,diesel from Japan) has exactly the same colour scheme,it is OEM. When I first saw the truck, before I bought it, my reaction to the colours were the same as yours (too much bling!) but after a year and a half I've gotten used to it and it will likely stay the same. Have you checked out the BEB's (big end bearings)yet? The 1HD-T seems to have this one weakness apparently corrected by installing ACL bearings from OZ, also by 80K you might want to check if the TIMING BELT was changed, which should be regular maintenance every 100,000 kilometres. Good Luck, they're great vehicles ! Cheers, Tony
 
Hello T.Stanford.

I'm glad to find someone else with a RHD car in a LHD country, I was starting to think I was the only one crazy enough!!;)

Have you experienced any problems because of it driving in the USA?

About the colour, I'll keep it a few months to see if I get used to it, maybe I'll end up liking it like you.

About the BEB, I'm sorry I'm not very good at technical terms in english, can you explain what is it in another words?
About the timing belt, I guess is the what we call distribution belt?

Thank you very much for the advise and excuse me if I can't explain technical terms very good in english.

Cheers
 
Hey David, I first want to say don't feel alone in a RHD in aLHD world, around here Japanese imports (RHD's) are becoming quite common because the Japanese drive so few miles and their local vehicle inspection laws so strngent that a 15 year old vehicle is usually in great shape. I should also say that I'm not in the USA but in British Columbia, Canada. Not that theres anything wrong with that...Getting on to your questions, the BEB's are the bearing shells mounted on the bottom of the connecting rods (where they meet the chank shaft). The bearings on many of these engines have failed so most that come into Canada are checked or swapped out for the Aussie bearings. If you wish to know more the topic is covered quite extensively in the Deisel forum. The timing belt is the neoprene drive belt located under the black cover at the front of the engine. This belt drives your valves and is important to change at the recommended intervals otherwise expensive damage can occur with failure Hope this helps, Tony
 
I forgot to mention about my experience driving RHD in a RHD world! I don't think there is any specific problems other than safely passing on one lane hiways. This winter my family and I drove deep into Mexico on mostly narrow one lane roads and didn't have any problems. The cities in Mexico are a problem no matter what you drive! The one thing you have to watch is your passenger side mirror, because it is so far away you don't easily pick up movement out of the corner of your eye, so if someone has overtaken you and is in the process of passing it's to know earlier (rather than later) .Tony
 
Thank you very much, T.Stanford.

I also drove a RHD Citroën in Spain before, but that was much smaller that the Land Cruiser. It makes me more quiet to know that you are not experiencing problems to drive such a bit RHD truck even in the narrow roads of Mexico! I'll take that advice about the passenger mirror.

About the BEB, I just printed your post and took it to my english mechanic to check it :cool:.

Thank you again.

David.
 
Back
Top Bottom