Heater Hoses on Firewall

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 2, 2017
Threads
86
Messages
701
Location
Tustin, California
Many threads on this, but cant find a clear answer. Im replacing my heater lines leading into the cabin along the firewall, there are two connecting to the center T pipe and one angle piece connecting to the T pipe on the passenger side. What size of hose do I need to purchase to replace these?

Thanks all.
 
There are only two sizes of heater hoses: 5/8” and 1/2”. Ok, there are some thinner but those aren’t technically for the heater.

The hoses you are talking about are 5/8”
 
There are only two sizes of heater hoses: 5/8” and 1/2”. Ok, there are some thinner but those aren’t technically for the heater.

The hoses you are talking about are 5/8”

One more question, For the other heater hoses what is an option other than OEM? Im looking for the two hoses that connect to the T PS side, the angle on drive side, and the two adjacent to it. The one from the thermostat to the T is an S shaped angle hose and I need an alternative.

PO did HPS Silicone, I know there are a lot of haters, but has yet to spring a leak or fail me. Regardless they didn't replace the ones connecting to the firewall, those are still ancient OEM. So they are seeping coolant. My OCD tells me to replace everything.
 
One more question, For the other heater hoses what is an option other than OEM? Im looking for the two hoses that connect to the T PS side, the angle on drive side, and the two adjacent to it. The one from the thermostat to the T is an S shaped angle hose and I need an alternative.

PO did HPS Silicone, I know there are a lot of haters, but has yet to spring a leak or fail me. Regardless they didn't replace the ones connecting to the firewall, those are still ancient OEM. So they are seeping coolant. My OCD tells me to replace everything.

non-OEM I would say NAPA.

Warning, if the leak is at the hoses connecting to the heater control valve, its very likely to actually BE the heater control valve. If its original than change it, its a ticking time bomb that WILL leave you stranded if you don't at least have an extra length of 5/8" to bypass it.
 
non-OEM I would say NAPA.

Warning, if the leak is at the hoses connecting to the heater control valve, its very likely to actually BE the heater control valve. If its original than change it, its a ticking time bomb that WILL leave you stranded if you don't at least have an extra length of 5/8" to bypass it.

Thanks, yeah got a fresh valve on there. PO took good care of the truck, did PHH with constant torque clamps too.
 
Back
Top Bottom