Heater Blower Dead

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 5, 2006
Threads
404
Messages
1,234
I think it was working when I drove to work this morning, but at lunch time, my heater motor was no longer blowing.

I checked the fuse & it looks fine. the switches for the different fan speeds all light up, but no blowie

Anybody had a sudden loss of the fan motor? Any suggestions on how to diagnos the problem without just replacing parts?
 
Mine is a 1995.

one other point that may be relevant.

I bought the Cruiser about a year ago. When I bough the rig, the selector buttons that switched the air flow from defrost, to vent, to floor, did not work. Based on what I know about the the two previous owners, neither did much of thier own work.

When I had the dash apart to install the CDL switch I noticed that the servo that did the switching for the air flow was unplugged. I plugged it back in and everything worked fine.

Since then I have been worried that maybe it was unplugged for a reason, any chance it may overload something that causes the heater not blow?
 
i've heard that some of the members had connectors accidentally disconnected to that latter model LC heater switches(Do an advance search in the 80's section). Worn blower motor brushes is more common to older models because of use and age.
 
Back
Top Bottom